Suppo Model 1250Kv Brushless Outrunner Motor, 4MM Shaft, 3.5MM Bullet Conn

LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1250Kv
Max. efficiency existing: 5-18 Amp
NoLoad current / 1.0 Amp
Present capability: 18 A/60 s
Max. Performance: 75%
Shaft size: 4mm

Recommended Design Weight: 300 - 800 g
Recommended Prop w/o Gearbox: 2s - 10 x 4.7; 3s - 9 x 5

This is a fantastic enhancement to the item currently being talked about.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

INCLUDES:
Two control horns w/4 changing holes and 2 mounting holes
(3/4" long [tall])
Two mounting plates w/2 mounting holes (3/8"x3/8")
Four 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "includes" above

Regularly acquired with the item that you are currently reviewing.

9x6 Thin Electric Prop

This is one R/C Airplane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are made utilizing a pultrusion procedure. This technique
    ca{uses|triggers} the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting a greater fiber (60%) to resin (nylon binder)
    density. Providing significantly greater strength and stiffness than
    glass filled nylon.
The additional stiffness is advantageous to control of vibration
    resonance response.
The greater strength permits the use of thinner cross-sections,
    advantageous to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Size: 9"
Prop Pitch: 6
Hub Density: 0.40"
Hub Size: 0.79"
Weight: 0.035pounds
Engine Shaft Size: N/A

COMMENTS:
Not for use with glow engines.

Want another fantastic item to enhance the above pointed out item?

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Dimension : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging content:
1 x 9g TITAN Servo Sets (with devices)

This item praises the main item below.

EC3 Device Connector (2)

Specs
Battery/Charger Accessories: Ports
Connector Type: EC3

Here is a fantastic item that many others have actually bought at the same time.

10x4.7 Slow Flyer Propeller

This is a 10x4.7 Slo-Flyer "tractor" (not a "pusher") airplane propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building reduces rotating mass for
    greater output and longer life.
Reinforcing carbon fibers help maintain real, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft finding rings
One finding ring instruction sheet

REQUIRES:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 10"
Pitch: 4.7

REMARKS:
Slo-Flyer props are Not designed for Radiance engines