Spektrum SX107 Micro Metal Gear Servo

Specs

Application: Small scale cars

Equipment Material: Metal

Height: 0.87" (22.2mm)

Length: 0.89" (22.8mm)

Programmable: No

Servo Operating Voltage: 4.8 - 6.0V

Servo Type: Analog

Speed: 4.8V 0.09 sec/60°, 6.0V 0.08 sec/60°

Torque: 4.8V 34.9oz/in (2.5kg/cm), 6.0V 41.8oz/in (3.0kg/cm)

Type: Micro Metal Equipment

Weight: 0.35oz (10g)

Width: 0.49" (12.5mm)

Frequently gotten with the thing that you are presently reading about.

Traxxas X-Maxx A-Arms, Upper & Lower, Green

This is a set of optional RPM Upper and Lower A-Arms in Green
for the Traxxas X-Maxx.

FUNCTIONS:
Molded from engineering grade nylon, green in color
Stronger and lighter than stock A-Arms
Replaces the stock Traxxas #7729 upper A-Arms, and the stock Traxxas
    #7730 and #7731 lower A-Arms
Lower A-Arms have geater clearance than stock A-Arms, and a double
    support beam to spread out effect energy over a larger location

INCLUDES:
One each Upper and Lower A-Arm

COMMENTS:
4 plans are required to finish one lorry

Want an additional fantastic thing to enhance the above stated thing?





.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Newly developed transmission with Dig function enables a tighter turning radius by locking the rear axle for FWD power only.

Currie F9 Website Axles boost ground clearance at the diff pumpkin for the best crawling performance.

Includes all-metal gears, from the center transmission to the lockers and portal axles.

Tube chassis style uses optimum clearance plus sensible scale looks.

All pivot points are on stainless steel balls for a long lasting, long-lasting suspension point.

Includes injection-molded, 3-piece, licensed Raceline beadlock wheels.

Adjustable oil-filled shocks include tough anodized, threaded shock bodies, a single coilover spring, and a cap with a bleed port.

All-metal front universal axles supply smooth action and 45 degrees of guiding angle for an effective, high-performance drivetrain.

Durable, machined aluminum universal.

Finely tuned suspension geometry delivers the very best crawling abilities





Overview
The Axial® Capra™ 1.9 Unlimited Trail Buggy Home builder's Set is a "brand-new from the ground up" style that any advanced RC enthusiast excited for innovative crawling will appreciate. Its Currie F9 Website Axles supply extra ground clearance at the diff pumpkin for the best crawling performance. With the included Dig transmission, you can likewise turn on the fly between 4WD and FWD straight from your 3-channel transmitter — locking the rear axle whenever you need the tighter turning radius of front drive power. The Capra includes a realistic tube chassis style and metal gears everywhere, from the center transmission to the lockers and portal axles. It flights on licensed Raceline 3-piece molded beadlock wheels that can be fitted with whatever 1.9 tires you choose. For pioneering performance in an RC path buggy kit, choose the Axial Capra.





Needed to Total

Radio System

Steering Servo

ESC

Motor

Battery

Battery charger

Micro Servo (for Dig operation, SPMSSX107 suggested)

What remains in the Box?

(1) Axial® Capra™ 1.9 Unlimited Trail Buggy 4WD Set

(1) Product Manual








 



CURRIE F9 PORTAL AXLES
The Currie F9 Website Axles include considerably more ground clearance at the diff pumpkin while likewise supplying an outstanding 7.39:1 gear ratio. Entirely ball bearing driven, and metal gears throughout for toughness.
 



HI-PINION GEARS
The ring and pinion gears are machined steel, consisting of the locker. The style uses a 6 bolt style for toughness.
 






 


 


DIG TRANSMISSION
The brand-new transmission has a Dig function that uses the tightest turning radius on a production crawler in the industry. When required, just change from 4WD to front-wheel-drive by locking the rear axle from your transmitter. The transmission likewise consists of a complete set of ball bearings and all metal internal gears for strength and durability.
NOTE: Dig functionality requires an additional micro servo, not included. Micro Dig Servo required, SPMSSX107 suggested (for Dig operation)
 







UNIVERSAL AXLE SET
Universal joint axles permit as much as 45 degrees of steering and supply smoother action for a greater performing, effective drivetrain.

Up to 45 degrees of guiding

Smooth action for an effective drivetrain

Compact yet durable style

Solidified steel building

 



WB8 HD WILDBOAR™ DRIVESHAFTS
WB8 HD Wildboar™ front and rear driveshafts include a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for higher strength. A center splined slider drifts between each end and has actually included product to minimize flex and tiredness.
 







6MM STAINLESS STEEL LINKS
Strong 6mm stainless steel links with high grade plastic rod ends for toughness. All links are metal consisting of the steering.
 



STAINLESS STEEL PIVOT BALLS
All pivot points are on stainless steel balls that supply a long lasting, long-lasting suspension point.
 







SKIDPLATE WITH BOAT SIDES
The Capra includes a small skidplate footprint with boat sides to assist maneuver and slide over rough, tough challenges.
 



STAINLESS STEEL STEERING LINKS
The guiding links are likewise made from 6mm stainless steel, offering accurate steering and toughness.
 







LARGE BORE ALUMINUM SHOCKS
The oil-filled shocks are a brand new style with tough anodized, threaded shock bodies and a single coilover spring. Their increased bore size develops more fluid volume for much better performance. A bleed screw helps to bleed air from the shock throughout assembly for higher consistency. The shocks are likewise tunable so you can achieve the very best dampening rate.
 



4-LINK SUSPENSION
We've fine-tuned the suspension geometry with multiple installing locations for the upper link mounts to supply the very best crawling abilities.
 







A1.9, 3-PIECE BEADLOCK WHEELS
For striking scale looks and major path performance, we've equipped the Capra™ with officially licensed 3-piece Raceline Monster beadlock wheels.
 



LED LIGHT BAR
A roof installed LED light bar helps light the way on those late night crawls with your good friends. Extra LED lights can be contributed to the front headlights (optional LED lights not included).
 







REALISTIC INTERIOR
Reasonable scale details include: polycarbonate interior tray with molded driver figures, complete color pre-cut decals with simulated carbon fiber panels, mock GPS navigation determines and switches, two black styrene helmets with visor decals, and more!
 



GRILLE AND HEADLIGHT BUCKETS
The molded plastic front grille includes two clear plastic headlight lenses with light containers (optional LED lights not included). Behind the grille, under the hood, are two hood mounts with clips. Get rid of the clips to raise the hood up and gain access to the battery tray.
 







ESC / RECEIVER TRAY
Tucked under the front dash is a cage installed ESC / receiver tray with integrated, adjustable cable television routing to keep your electrical wiring organized.
 



BATTERY TRAY
The battery tray is forward installed, and situated under the hood. The tray size is constructed for shorty packs, at a maximum size of 26mm x 98mm x 47mm.
 







HOOD RELEASE
Get rid of the clips concealed on the underside of the tube frame to raise the hood up and gain access to the battery tray.
 



SERVO HORN WITH METAL INSERT
The servo horn includes a 23T press fit metal insert for toughness.
 









Specifications

Approximate Assembly Time: 7-10 Hours

Ball Bearings: Full set

Batteries: Shorty configuration

Body: Unpainted panels

Brakes: Integral with ESC

Bushing Material: Metal

Charger: Sold separately

Chassis: Injection molded tubular

Completion Level: Kit

Differential: Locked

Drivetrain: 4WD Shaft Drive

Final Drive Ratio: 37:1

Gear Pitch: 32-Pitch

Ground Clearance: 3" (76.2mm)

Height: 8.25" (209.5mm)

Internal Gear Ratio: 5.14:1

Length: 17" (431.8mm)

Max Battery Dimensions: 1.02 x 3.8 x 1.8" (26 x 98 x 47mm)

Motor Size: 540 sold separately

Pinion: 14T

Radio: At least 3-channel (sold separately)

Servos: High torque steering servo (sold separately

Shock Type: Aluminum body, oil-filled, coil-over spring, soft and firm springs included

Size/Scale: 1/10

Speed Control: Axial AE-5L (sold separately) to operate light bar

Suspension: 4-link w/stainless steel pivot balls

Tire Compound: Tires sold separately

Track: Front and Rear, 8.75" (222.2mm) distance from outer edges of tires measured side-to-side

Vehicle Type: Crawler, Scale 4x4 crawler kit

Water-Resistant: Yes

Weight: 4lbs (1.8kg)

Wheel Diameter: 1.9" (48.26mm)

Wheel Hex Size: 12mm Hex

Wheel Type: Raceline 3-piece beadlock monster

Wheel Width: 1" (25.4mm)

Wheelbase: 12.5" (317.5mm)

Width: 10.25" (260.35mm)