Spektrum SX107 Micro Metal Gear Servo

Requirements

Application: Small scale cars

Gear Product: Metal

Height: 0.87" (22.2mm)

Length: 0.89" (22.8mm)

Programmable: No

Servo Operating Voltage: 4.8 - 6.0V

Servo Type: Analog

Speed: 4.8V 0.09 sec/60°, 6.0V 0.08 sec/60°

Torque: 4.8V 34.9oz/in (2.5kg/cm), 6.0V 41.8oz/in (3.0kg/cm)

Type: Micro Metal Gear

Weight: 0.35oz (10g)

Width: 0.49" (12.5mm)

Frequently gotten with the product that you are presently reviewing.

Traxxas X-Maxx A-Arms, Upper & Lower, Green

This is a set of optional RPM Upper and Lower A-Arms in Green
for the Traxxas X-Maxx.

FEATURES:
Molded from engineering grade nylon, green in color
Stronger and lighter than stock A-Arms
Replaces the stock Traxxas #7729 upper A-Arms, and the stock Traxxas
    #7730 and #7731 lower A-Arms
Lower A-Arms have geater clearance than stock A-Arms, and a double
    assistance beam to spread out effect energy over a bigger area

INCLUDES:
One each Upper and Lower A-Arm

REMARKS:
Four plans are required to finish one car

Want another wonderful product to enhance the above mentioned product?





.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Recently developed transmission with Dig function makes it possible for a tighter turning radius by locking the rear axle for FWD power only.

Currie F9 Portal Axles increase ground clearance at the diff pumpkin for the very best crawling performance.

Includes all-metal gears, from the center transmission to the lockers and portal axles.

Tube chassis design uses optimum clearance plus sensible scale looks.

All pivot points are on stainless-steel balls for a resilient, long-lasting suspension point.

Includes injection-molded, 3-piece, licensed Raceline beadlock wheels.

Adjustable oil-filled shocks feature hard anodized, threaded shock bodies, a single coilover spring, and a cap with a bleed port.

All-metal front universal axles supply smooth action and 45 degrees of steering angle for an effective, high-performance drivetrain.

Durable, machined aluminum universal.

Finely tuned suspension geometry delivers the best crawling capabilities





Overview
The Axial® Capra™ 1.9 Unlimited Trail Buggy Contractor's Kit is a "brand-new from the ground up" design that any innovative RC enthusiast eager for innovative crawling will value. Its Currie F9 Portal Axles supply extra ground clearance at the diff pumpkin for the very best crawling efficiency. With the consisted of Dig transmission, you can also switch on the fly between 4WD and FWD straight from your 3-channel transmitter — locking the rear axle whenever you need the tighter turning radius of front drive power. The Capra features a sensible tube chassis design and metal gears everywhere, from the center transmission to the lockers and portal axles. It flights on licensed Raceline 3-piece formed beadlock wheels that can be fitted with whatever 1.9 tires you prefer. For pioneering efficiency in an RC trail buggy package, select the Axial Capra.





Needed to Total

Radio System

Steering Servo

ESC

Motor

Battery

Battery charger

Micro Servo (for Dig operation, SPMSSX107 suggested)

What remains in the Box?

(1) Axial® Capra™ 1.9 Unlimited Trail Buggy 4WD Kit

(1) Product Handbook








 



CURRIE F9 PORTAL AXLES
The Currie F9 Portal Axles include substantially more ground clearance at the diff pumpkin while also supplying an outstanding 7.39:1 gear ratio. Completely ball bearing driven, and metal gears throughout for toughness.
 



HI-PINION GEARS
The ring and pinion gears are machined steel, consisting of the locker. The design utilizes a 6 bolt design for toughness.
 






 


 


DIG TRANSMISSION
The brand-new transmission has a Dig function that uses the tightest turning radius on a production spider in the industry. When required, just change from 4WD to front-wheel-drive by locking the rear axle from your transmitter. The transmission also includes a full set of ball bearings and all metal internal gears for strength and durability.
NOTE: Dig functionality requires an extra micro servo, not consisted of. Micro Dig Servo required, SPMSSX107 suggested (for Dig operation)
 







UNIVERSAL AXLE SET
Universal joint axles allow approximately 45 degrees of steering and supply smoother action for a higher performing, efficient drivetrain.

Up to 45 degrees of steering

Smooth action for an effective drivetrain

Compact yet resilient design

Hardened steel building

 



WB8 HD WILDBOAR™ DRIVESHAFTS
WB8 HD Wildboar™ front and rear driveshafts feature a bigger size cross pin (2x11mm) in addition to an M4 Screw Shaft (2mm hex drive) for higher strength. A center splined slider floats between each end and has actually included product to decrease flex and fatigue.
 







6MM STAINLESS STEEL LINKS
Strong 6mm stainless-steel relate to high grade plastic rod ends for toughness. All links are metal consisting of the steering.
 



STAINLESS STEEL PIVOT BALLS
All pivot points are on stainless-steel balls that supply a resilient, long-lasting suspension point.
 







SKIDPLATE WITH BOAT SIDES
The Capra features a small skidplate footprint with boat sides to assist maneuver and slide over rough, tough barriers.
 



STAINLESS STEEL STEERING LINKS
The steering links are also made from 6mm stainless-steel, using accurate steering and toughness.
 







LARGE BORE ALUMINUM SHOCKS
The oil-filled shocks are a brand new design with hard anodized, threaded shock bodies and a single coilover spring. Their increased bore size develops more fluid volume for much better efficiency. A bleed screw assists to bleed air from the shock throughout assembly for higher consistency. The shocks are also tunable so you can accomplish the best dampening rate.
 



4-LINK SUSPENSION
We've fine-tuned the suspension geometry with several mounting areas for the upper link installs to supply the best crawling capabilities.
 







A1.9, 3-PIECE BEADLOCK WHEELS
For striking scale looks and major trail efficiency, we've outfitted the Capra™ with formally licensed 3-piece Raceline Beast beadlock wheels.
 



LED LIGHT BAR
A roof installed LED light bar assists light the way on those late night crawls with your pals. Additional LED lights can be contributed to the front headlights (optional LED lights not consisted of).
 







REALISTIC INTERIOR
Practical scale information consist of: polycarbonate interior tray with molded motorist figures, complete color pre-cut decals with simulated carbon fiber panels, mock GPS navigation determines and changes, two black styrene helmets with visor decals, and more!
 



GRILLE AND HEADLIGHT BUCKETS
The formed plastic front grille features two clear plastic headlight lenses with light containers (optional LED lights not consisted of). Behind the grille, under the hood, are two hood installs with clips. Eliminate the clips to raise the hood up and access to the battery tray.
 







ESC / RECEIVER TRAY
Tucked under the front dash is a cage installed ESC / receiver tray with incorporated, adjustable cable routing to keep your electrical wiring arranged.
 



BATTERY TRAY
The battery tray is forward installed, and situated under the hood. The tray size is built for shorty packs, at a maximum size of 26mm x 98mm x 47mm.
 







HOOD RELEASE
Eliminate the clips hidden on the underside of television frame to raise the hood up and access to the battery tray.
 



SERVO HORN WITH METAL INSERT
The servo horn features a 23T press fit metal insert for toughness.
 









Specifications

Approximate Assembly Time: 7-10 Hours

Ball Bearings: Full set

Batteries: Shorty configuration

Body: Unpainted panels

Brakes: Integral with ESC

Bushing Material: Metal

Charger: Sold separately

Chassis: Injection molded tubular

Completion Level: Kit

Differential: Locked

Drivetrain: 4WD Shaft Drive

Final Drive Ratio: 37:1

Gear Pitch: 32-Pitch

Ground Clearance: 3" (76.2mm)

Height: 8.25" (209.5mm)

Internal Gear Ratio: 5.14:1

Length: 17" (431.8mm)

Max Battery Dimensions: 1.02 x 3.8 x 1.8" (26 x 98 x 47mm)

Motor Size: 540 sold separately

Pinion: 14T

Radio: At least 3-channel (sold separately)

Servos: High torque steering servo (sold separately

Shock Type: Aluminum body, oil-filled, coil-over spring, soft and firm springs included

Size/Scale: 1/10

Speed Control: Axial AE-5L (sold separately) to operate light bar

Suspension: 4-link w/stainless steel pivot balls

Tire Compound: Tires sold separately

Track: Front and Rear, 8.75" (222.2mm) distance from outer edges of tires measured side-to-side

Vehicle Type: Crawler, Scale 4x4 crawler kit

Water-Resistant: Yes

Weight: 4lbs (1.8kg)

Wheel Diameter: 1.9" (48.26mm)

Wheel Hex Size: 12mm Hex

Wheel Type: Raceline 3-piece beadlock monster

Wheel Width: 1" (25.4mm)

Wheelbase: 12.5" (317.5mm)

Width: 10.25" (260.35mm)