Spektrum SX107 Micro Metal Gear Servo

Specifications

Application: Little scale vehicles

Equipment Product: Metal

Height: 0.87" (22.2mm)

Length: 0.89" (22.8mm)

Programmable: No

Servo Operating Voltage: 4.8 - 6.0V

Servo Type: Analog

Speed: 4.8V 0.09 sec/60°, 6.0V 0.08 sec/60°

Torque: 4.8V 34.9oz/in (2.5kg/cm), 6.0V 41.8oz/in (3.0kg/cm)

Type: Micro Metal Equipment

Weight: 0.35oz (10g)

Width: 0.49" (12.5mm)

Regularly gotten with the thing that you are presently reviewing.

Traxxas X-Maxx A-Arms, Upper & Lower, Green

This is a pair of optional RPM Upper and Lower A-Arms in Green
for the Traxxas X-Maxx.

FEATURES:
Molded from engineering grade nylon, green in color
Stronger and lighter than stock A-Arms
Changes the stock Traxxas #7729 upper A-Arms, and the stock Traxxas
    #7730 and #7731 lower A-Arms
Lower A-Arms have geater clearance than stock A-Arms, and a double
    support beam to spread out impact energy over a bigger location

INCLUDES:
One each Upper and Lower A-Arm

REMARKS:
4 plans are required to complete one vehicle

Want one more fantastic thing to compliment the above stated thing?





.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Freshly developed transmission with Dig function enables a tighter turning radius by locking the rear axle for FWD power only.

Currie F9 Portal Axles boost ground clearance at the diff pumpkin for the very best crawling performance.

Includes all-metal equipments, from the center transmission to the lockers and portal axles.

Tube chassis design uses maximum clearance plus reasonable scale looks.

All pivot points are on stainless-steel balls for a long lasting, long-lasting suspension point.

Includes injection-molded, 3-piece, certified Raceline beadlock wheels.

Adjustable oil-filled shocks include difficult anodized, threaded shock bodies, a single coilover spring, and a cap with a bleed port.

All-metal front universal axles offer smooth action and 45 degrees of steering angle for an effective, high-performance drivetrain.

Durable, machined aluminum universal.

Finely tuned suspension geometry delivers the very best crawling capabilities





Overview
The Axial® Capra™ 1.9 Unlimited Trail Buggy Home builder's Kit is a "brand-new from the ground up" design that any innovative RC enthusiast excited for advanced crawling will appreciate. Its Currie F9 Portal Axles offer extra ground clearance at the diff pumpkin for the very best crawling performance. With the consisted of Dig transmission, you can likewise switch on the fly in between 4WD and FWD directly from your 3-channel transmitter — locking the rear axle whenever you require the tighter turning radius of front drive power. The Capra features a reasonable tube chassis design and metal equipments all over, from the center transmission to the lockers and portal axles. It flights on certified Raceline 3-piece molded beadlock wheels that can be fitted with whatever 1.9 tires you prefer. For pioneering performance in an RC path buggy kit, pick the Axial Capra.





Needed to Complete

Radio System

Steering Servo

ESC

Motor

Battery

Charger

Micro Servo (for Dig operation, SPMSSX107 suggested)

What's in the Box?

(1) Axial® Capra™ 1.9 Unlimited Trail Buggy 4WD Kit

(1) Item Manual








 



CURRIE F9 PORTAL AXLES
The Currie F9 Portal Axles include substantially more ground clearance at the diff pumpkin while likewise providing an outstanding 7.39:1 gear ratio. Entirely ball bearing driven, and metal equipments throughout for toughness.
 



HI-PINION GEARS
The ring and pinion equipments are machined steel, including the locker. The design utilizes a six bolt design for toughness.
 






 


 


DIG TRANSMISSION
The brand-new transmission has a Dig function that uses the tightest turning radius on a production spider in the industry. When needed, merely switch from 4WD to front-wheel-drive by locking the rear axle from your transmitter. The transmission likewise consists of a full set of ball bearings and all metal internal equipments for strength and durability.
NOTE: Dig functionality needs an extra micro servo, not consisted of. Micro Dig Servo required, SPMSSX107 suggested (for Dig operation)
 







UNIVERSAL AXLE SET
Universal joint axles allow approximately 45 degrees of steering and offer smoother action for a higher performing, efficient drivetrain.

Up to 45 degrees of steering

Smooth action for an effective drivetrain

Compact yet long lasting design

Hardened steel building and construction

 



WB8 HD WILDBOAR™ DRIVESHAFTS
WB8 HD Wildboar™ front and rear driveshafts include a bigger size cross pin (2x11mm) in addition to an M4 Screw Shaft (2mm hex drive) for greater strength. A center splined slider drifts in between each end and has actually added material to decrease flex and tiredness.
 







6MM STAINLESS STEEL HYPERLINKS
Strong 6mm stainless-steel relate to high grade plastic rod ends for toughness. All links are metal including the steering.
 



STAINLESS STEEL PIVOT BALLS
All pivot points are on stainless-steel balls that offer a long lasting, long-lasting suspension point.
 







SKIDPLATE WITH BOAT SIDES
The Capra features a small skidplate footprint with boat sides to assist maneuver and slide over rough, tough challenges.
 



STAINLESS STEEL STEERING LINKS
The steering links are likewise made from 6mm stainless-steel, offering exact steering and toughness.
 







LARGE BORE ALUMINUM SHOCKS
The oil-filled shocks are a brand new design with difficult anodized, threaded shock bodies and a single coilover spring. Their increased bore size produces more fluid volume for much better performance. A bleed screw assists to bleed air from the shock throughout assembly for greater consistency. The shocks are likewise tunable so you can accomplish the very best dampening rate.
 



4-LINK SUSPENSION
We've fine-tuned the suspension geometry with several installing locations for the upper link installs to offer the very best crawling capabilities.
 







A1.9, 3-PIECE BEADLOCK WHEELS
For striking scale looks and serious path performance, we've outfitted the Capra™ with formally certified 3-piece Raceline Beast beadlock wheels.
 



LED LIGHT BAR
A roofing system installed LED light bar assists light the way on those late night crawls with your pals. Extra LED lights can be contributed to the front headlights (optional LED lights not consisted of).
 







REALISTIC INTERIOR
Reasonable scale information include: polycarbonate interior tray with molded motorist figures, full color pre-cut decals with simulated carbon fiber panels, mock GPS navigation assesses and changes, two black styrene helmets with visor decals, and more!
 



GRILLE AND HEADLIGHT BUCKETS
The molded plastic front grille features two clear plastic headlight lenses with light buckets (optional LED lights not consisted of). Behind the grille, under the hood, are two hood installs with clips. Eliminate the clips to raise the hood up and get to the battery tray.
 







ESC / RECEIVER TRAY
Tucked under the front dash is a cage installed ESC / receiver tray with incorporated, adjustable cable routing to keep your circuitry organized.
 



BATTERY TRAY
The battery tray is forward installed, and situated under the hood. The tray size is constructed for shorty packs, at an optimum size of 26mm x 98mm x 47mm.
 







HOOD RELEASE
Eliminate the clips concealed on the underside of the tube frame to raise the hood up and get to the battery tray.
 



SERVO HORN WITH METAL INSERT
The servo horn features a 23T press fit metal insert for toughness.
 









Specifications

Approximate Assembly Time: 7-10 Hours

Ball Bearings: Full set

Batteries: Shorty configuration

Body: Unpainted panels

Brakes: Integral with ESC

Bushing Material: Metal

Charger: Sold separately

Chassis: Injection molded tubular

Completion Level: Kit

Differential: Locked

Drivetrain: 4WD Shaft Drive

Final Drive Ratio: 37:1

Gear Pitch: 32-Pitch

Ground Clearance: 3" (76.2mm)

Height: 8.25" (209.5mm)

Internal Gear Ratio: 5.14:1

Length: 17" (431.8mm)

Max Battery Dimensions: 1.02 x 3.8 x 1.8" (26 x 98 x 47mm)

Motor Size: 540 sold separately

Pinion: 14T

Radio: At least 3-channel (sold separately)

Servos: High torque steering servo (sold separately

Shock Type: Aluminum body, oil-filled, coil-over spring, soft and firm springs included

Size/Scale: 1/10

Speed Control: Axial AE-5L (sold separately) to operate light bar

Suspension: 4-link w/stainless steel pivot balls

Tire Compound: Tires sold separately

Track: Front and Rear, 8.75" (222.2mm) distance from outer edges of tires measured side-to-side

Vehicle Type: Crawler, Scale 4x4 crawler kit

Water-Resistant: Yes

Weight: 4lbs (1.8kg)

Wheel Diameter: 1.9" (48.26mm)

Wheel Hex Size: 12mm Hex

Wheel Type: Raceline 3-piece beadlock monster

Wheel Width: 1" (25.4mm)

Wheelbase: 12.5" (317.5mm)

Width: 10.25" (260.35mm)