Spektrum SX107 Micro Metal Gear Servo

Specifications

Application: Small scale vehicles

Equipment Product: Metal

Height: 0.87" (22.2mm)

Length: 0.89" (22.8mm)

Programmable: No

Servo Operating Voltage: 4.8 - 6.0V

Servo Type: Analog

Speed: 4.8V 0.09 sec/60°, 6.0V 0.08 sec/60°

Torque: 4.8V 34.9oz/in (2.5kg/cm), 6.0V 41.8oz/in (3.0kg/cm)

Type: Micro Metal Equipment

Weight: 0.35oz (10g)

Width: 0.49" (12.5mm)

Frequently purchased with the item that you are currently reading about.

Traxxas X-Maxx A-Arms, Upper & Lower, Green

This is a pair of optional RPM Upper and Lower A-Arms in Green
for the Traxxas X-Maxx.

FUNCTIONS:
Molded from engineering grade nylon, green in color
More powerful and lighter than stock A-Arms
Replaces the stock Traxxas #7729 upper A-Arms, and the stock Traxxas
    #7730 and #7731 lower A-Arms
Lower A-Arms have geater clearance than stock A-Arms, and a double
    assistance beam to spread impact energy over a bigger location

CONSISTS OF:
One each Upper and Lower A-Arm

COMMENTS:
Four plans are required to finish one car

Want an additional fantastic item to match the above discussed item?





.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Recently designed transmission with Dig function allows a tighter turning radius by locking the rear axle for FWD power only.

Currie F9 Portal Axles increase ground clearance at the diff pumpkin for the very best crawling performance.

Includes all-metal gears, from the center transmission to the lockers and portal axles.

Tube chassis style uses optimum clearance plus reasonable scale looks.

All pivot points are on stainless-steel balls for a durable, lasting suspension point.

Includes injection-molded, 3-piece, certified Raceline beadlock wheels.

Adjustable oil-filled shocks include difficult anodized, threaded shock bodies, a single coilover spring, and a cap with a bleed port.

All-metal front universal axles supply smooth action and 45 degrees of guiding angle for an efficient, high-performance drivetrain.

Durable, machined aluminum universal.

Finely tuned suspension geometry delivers the very best crawling abilities





Overview
The Axial® Capra™ 1.9 Unlimited Path Buggy Home builder's Set is a "brand-new from the ground up" style that any innovative RC enthusiast eager for advanced crawling will appreciate. Its Currie F9 Portal Axles supply extra ground clearance at the diff pumpkin for the very best crawling efficiency. With the included Dig transmission, you can also turn on the fly in between 4WD and FWD straight from your 3-channel transmitter — locking the rear axle whenever you need the tighter turning radius of front drive power. The Capra features a practical tube chassis style and metal gears everywhere, from the center transmission to the lockers and portal axles. It trips on certified Raceline 3-piece formed beadlock wheels that can be fitted with whatever 1.9 tires you prefer. For pioneering efficiency in an RC trail buggy kit, pick the Axial Capra.





Needed to Complete

Radio System

Steering Servo

ESC

Motor

Battery

Charger

Micro Servo (for Dig operation, SPMSSX107 advised)

What remains in package?

(1) Axial® Capra™ 1.9 Unlimited Path Buggy 4WD Set

(1) Product Manual








 



CURRIE F9 PORTAL AXLES
The Currie F9 Portal Axles add considerably more ground clearance at the diff pumpkin while also providing an excellent 7.39:1 gear ratio. Completely ball bearing driven, and metal gears throughout for toughness.
 



HI-PINION GEARS
The ring and pinion gears are machined steel, consisting of the locker. The style utilizes a 6 bolt style for toughness.
 






 


 


DIG TRANSMISSION
The brand-new transmission has a Dig function that uses the tightest turning radius on a production crawler in the market. When required, simply change from 4WD to front-wheel-drive by locking the rear axle from your transmitter. The transmission also includes a full set of ball bearings and all metal internal gears for strength and durability.
NOTE: Dig functionality needs an additional micro servo, not included. Micro Dig Servo required, SPMSSX107 advised (for Dig operation)
 







UNIVERSAL AXLE SET
Universal joint axles allow as much as 45 degrees of steering and supply smoother action for a greater performing, efficient drivetrain.

Up to 45 degrees of guiding

Smooth action for an efficient drivetrain

Compact yet durable style

Solidified steel building and construction

 



WB8 HD WILDBOAR™ DRIVESHAFTS
WB8 HD Wildboar™ front and rear driveshafts include a bigger size cross pin (2x11mm) in addition to an M4 Screw Shaft (2mm hex drive) for higher strength. A center splined slider drifts in between each end and has actually added material to decrease flex and tiredness.
 







6MM STAINLESS STEEL LINKS
Strong 6mm stainless-steel links with high grade plastic rod ends for toughness. All links are metal consisting of the steering.
 



STAINLESS STEEL PIVOT BALLS
All pivot points are on stainless-steel balls that supply a durable, lasting suspension point.
 







SKIDPLATE WITH BOAT SIDES
The Capra features a little skidplate footprint with boat sides to help maneuver and slide over rough, difficult obstacles.
 



STAINLESS STEEL STEERING LINKS
The guiding links are also made from 6mm stainless-steel, providing precise steering and toughness.
 







LARGE BORE ALUMINUM SHOCKS
The oil-filled shocks are a brand new style with difficult anodized, threaded shock bodies and a single coilover spring. Their increased bore size creates more fluid volume for much better efficiency. A bleed screw helps to bleed air from the shock during assembly for higher consistency. The shocks are also tunable so you can attain the very best dampening rate.
 



4-LINK SUSPENSION
We have actually fine-tuned the suspension geometry with multiple mounting areas for the upper link mounts to supply the very best crawling abilities.
 







A1.9, 3-PIECE BEADLOCK WHEELS
For striking scale looks and serious trail efficiency, we have actually outfitted the Capra™ with formally certified 3-piece Raceline Beast beadlock wheels.
 



LED LIGHT BAR
A roofing system installed LED light bar helps light the way on those late night crawls with your good friends. Additional LED lights can be added to the front headlights (optional LED lights not included).
 







REALISTIC INTERIOR
Realistic scale information consist of: polycarbonate interior tray with molded motorist figures, complete color pre-cut decals with simulated carbon fiber panels, mock GPS navigation assesses and switches, 2 black styrene helmets with visor decals, and more!
 



GRILLE AND HEADLIGHT BUCKETS
The formed plastic front grille features 2 clear plastic headlight lenses with light pails (optional LED lights not included). Behind the grille, under the hood, are 2 hood mounts with clips. Get rid of the clips to raise the hood up and access to the battery tray.
 







ESC / RECEIVER TRAY
Tucked under the front dash is a cage installed ESC / receiver tray with incorporated, adjustable cable television routing to keep your wiring organized.
 



BATTERY TRAY
The battery tray is forward installed, and located under the hood. The tray size is built for shorty packs, at a maximum size of 26mm x 98mm x 47mm.
 







HOOD RELEASE
Get rid of the clips concealed on the underside of television frame to raise the hood up and access to the battery tray.
 



SERVO HORN WITH METAL INSERT
The servo horn features a 23T press fit metal insert for toughness.
 









Specifications

Approximate Assembly Time: 7-10 Hours

Ball Bearings: Full set

Batteries: Shorty configuration

Body: Unpainted panels

Brakes: Integral with ESC

Bushing Material: Metal

Charger: Sold separately

Chassis: Injection molded tubular

Completion Level: Kit

Differential: Locked

Drivetrain: 4WD Shaft Drive

Final Drive Ratio: 37:1

Gear Pitch: 32-Pitch

Ground Clearance: 3" (76.2mm)

Height: 8.25" (209.5mm)

Internal Gear Ratio: 5.14:1

Length: 17" (431.8mm)

Max Battery Dimensions: 1.02 x 3.8 x 1.8" (26 x 98 x 47mm)

Motor Size: 540 sold separately

Pinion: 14T

Radio: At least 3-channel (sold separately)

Servos: High torque steering servo (sold separately

Shock Type: Aluminum body, oil-filled, coil-over spring, soft and firm springs included

Size/Scale: 1/10

Speed Control: Axial AE-5L (sold separately) to operate light bar

Suspension: 4-link w/stainless steel pivot balls

Tire Compound: Tires sold separately

Track: Front and Rear, 8.75" (222.2mm) distance from outer edges of tires measured side-to-side

Vehicle Type: Crawler, Scale 4x4 crawler kit

Water-Resistant: Yes

Weight: 4lbs (1.8kg)

Wheel Diameter: 1.9" (48.26mm)

Wheel Hex Size: 12mm Hex

Wheel Type: Raceline 3-piece beadlock monster

Wheel Width: 1" (25.4mm)

Wheelbase: 12.5" (317.5mm)

Width: 10.25" (260.35mm)