Spektrum SX107 Micro Metal Gear Servo

Specifications

Application: Small scale cars

Equipment Material: Metal

Height: 0.87" (22.2mm)

Length: 0.89" (22.8mm)

Programmable: No

Servo Operating Voltage: 4.8 - 6.0V

Servo Type: Analog

Speed: 4.8V 0.09 sec/60°, 6.0V 0.08 sec/60°

Torque: 4.8V 34.9oz/in (2.5kg/cm), 6.0V 41.8oz/in (3.0kg/cm)

Type: Micro Metal Equipment

Weight: 0.35oz (10g)

Width: 0.49" (12.5mm)

Frequently purchased with the product that you are presently reading about.

Traxxas X-Maxx A-Arms, Upper & Lower, Green

This is a set of optional RPM Upper and Lower A-Arms in Green
for the Traxxas X-Maxx.

FUNCTIONS:
Formed from engineering grade nylon, green in color
Stronger and lighter than stock A-Arms
Changes the stock Traxxas #7729 upper A-Arms, and the stock Traxxas
    #7730 and #7731 lower A-Arms
Lower A-Arms have geater clearance than stock A-Arms, and a double
    support beam to spread impact energy over a bigger location

CONSISTS OF:
One each Upper and Lower A-Arm

REMARKS:
4 packages are required to complete one car

Want another fantastic product to compliment the above discussed product?





.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Newly developed transmission with Dig function enables a tighter turning radius by locking the rear axle for FWD power only.

Currie F9 Website Axles boost ground clearance at the diff pumpkin for the best crawling performance.

Includes all-metal equipments, from the center transmission to the lockers and portal axles.

Tube chassis style provides optimum clearance plus reasonable scale looks.

All pivot points are on stainless steel balls for a durable, lasting suspension point.

Includes injection-molded, 3-piece, certified Raceline beadlock wheels.

Adjustable oil-filled shocks feature difficult anodized, threaded shock bodies, a single coilover spring, and a cap with a bleed port.

All-metal front universal axles provide smooth action and 45 degrees of steering angle for an efficient, high-performance drivetrain.

Durable, machined aluminum universal.

Finely tuned suspension geometry provides the very best crawling capabilities





Overview
The Axial® Capra™ 1.9 Unlimited Trail Buggy Contractor's Kit is a "new from the ground up" style that any innovative RC lover eager for cutting-edge crawling will appreciate. Its Currie F9 Website Axles provide additional ground clearance at the diff pumpkin for the best crawling efficiency. With the included Dig transmission, you can likewise switch on the fly in between 4WD and FWD directly from your 3-channel transmitter — locking the rear axle whenever you need the tighter turning radius of front drive power. The Capra includes a practical tube chassis style and metal equipments everywhere, from the center transmission to the lockers and portal axles. It rides on certified Raceline 3-piece formed beadlock wheels that can be fitted with whatever 1.9 tires you prefer. For pioneering efficiency in an RC trail buggy package, select the Axial Capra.





Needed to Complete

Radio System

Steering Servo

ESC

Motor

Battery

Charger

Micro Servo (for Dig operation, SPMSSX107 suggested)

What remains in package?

(1) Axial® Capra™ 1.9 Unlimited Trail Buggy 4WD Kit

(1) Product Handbook








 



CURRIE F9 PORTAL AXLES
The Currie F9 Website Axles include considerably more ground clearance at the diff pumpkin while likewise offering an excellent 7.39:1 gear ratio. Entirely ball bearing driven, and metal equipments throughout for resilience.
 



HI-PINION GEARS
The ring and pinion equipments are machined steel, including the locker. The style utilizes a six bolt style for resilience.
 






 


 


DIG TRANSMISSION
The new transmission has a Dig function that provides the tightest turning radius on a production spider in the industry. When needed, merely change from 4WD to front-wheel-drive by locking the rear axle from your transmitter. The transmission likewise consists of a complete set of ball bearings and all metal internal equipments for strength and durability.
NOTE: Dig performance requires an extra micro servo, not included. Micro Dig Servo required, SPMSSX107 suggested (for Dig operation)
 







UNIVERSAL AXLE SET
Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher carrying out, effective drivetrain.

Up to 45 degrees of steering

Smooth action for an efficient drivetrain

Compact yet resilient style

Hardened steel building

 



WB8 HD WILDBOAR™ DRIVESHAFTS
WB8 HD Wildboar™ front and rear driveshafts feature a bigger size cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for higher strength. A center splined slider floats in between each end and has included product to lower flex and fatigue.
 







6MM STAINLESS STEEL LINKS
Strong 6mm stainless steel relate to high grade plastic rod ends for resilience. All links are metal including the steering.
 



STAINLESS STEEL PIVOT BALLS
All pivot points are on stainless steel balls that provide a durable, lasting suspension point.
 







SKIDPLATE WITH BOAT SIDES
The Capra includes a little skidplate footprint with boat sides to help maneuver and slide over rough, challenging obstacles.
 



STAINLESS STEEL STEERING LINKS
The steering links are likewise made from 6mm stainless steel, providing exact steering and resilience.
 







LARGE BORE ALUMINUM SHOCKS
The oil-filled shocks are an all-new style with difficult anodized, threaded shock bodies and a single coilover spring. Their increased bore size creates more fluid volume for much better efficiency. A bleed screw assists to bleed air from the shock throughout assembly for higher consistency. The shocks are likewise tunable so you can accomplish the very best dampening rate.
 



4-LINK SUSPENSION
We've fine-tuned the suspension geometry with multiple installing locations for the upper link installs to provide the very best crawling capabilities.
 







A1.9, 3-PIECE BEADLOCK WHEELS
For striking scale looks and severe trail efficiency, we've outfitted the Capra™ with officially certified 3-piece Raceline Monster beadlock wheels.
 



LED LIGHT BAR
A roofing mounted LED light bar assists light the way on those late night crawls with your friends. Additional LED lights can be added to the front headlights (optional LED lights not included).
 







REALISTIC INTERIOR
Reasonable scale details consist of: polycarbonate interior tray with molded motorist figures, full color pre-cut decals with simulated carbon fiber panels, mock GPS navigation gauges and switches, 2 black styrene helmets with visor decals, and more!
 



GRILLE AND HEADLIGHT BUCKETS
The formed plastic front grille includes 2 clear plastic headlight lenses with light buckets (optional LED lights not included). Behind the grille, under the hood, are 2 hood installs with clips. Get rid of the clips to raise the hood up and access to the battery tray.
 







ESC / RECEIVER TRAY
Tucked under the front dash is a cage mounted ESC / receiver tray with incorporated, adjustable cable routing to keep your circuitry organized.
 



BATTERY TRAY
The battery tray is forward mounted, and situated under the hood. The tray size is constructed for shorty packs, at an optimum size of 26mm x 98mm x 47mm.
 







HOOD RELEASE
Get rid of the clips hidden on the underside of the tube frame to raise the hood up and access to the battery tray.
 



SERVO HORN WITH METAL INSERT
The servo horn includes a 23T press fit metal insert for resilience.
 









Specifications

Approximate Assembly Time: 7-10 Hours

Ball Bearings: Full set

Batteries: Shorty configuration

Body: Unpainted panels

Brakes: Integral with ESC

Bushing Material: Metal

Charger: Sold separately

Chassis: Injection molded tubular

Completion Level: Kit

Differential: Locked

Drivetrain: 4WD Shaft Drive

Final Drive Ratio: 37:1

Gear Pitch: 32-Pitch

Ground Clearance: 3" (76.2mm)

Height: 8.25" (209.5mm)

Internal Gear Ratio: 5.14:1

Length: 17" (431.8mm)

Max Battery Dimensions: 1.02 x 3.8 x 1.8" (26 x 98 x 47mm)

Motor Size: 540 sold separately

Pinion: 14T

Radio: At least 3-channel (sold separately)

Servos: High torque steering servo (sold separately

Shock Type: Aluminum body, oil-filled, coil-over spring, soft and firm springs included

Size/Scale: 1/10

Speed Control: Axial AE-5L (sold separately) to operate light bar

Suspension: 4-link w/stainless steel pivot balls

Tire Compound: Tires sold separately

Track: Front and Rear, 8.75" (222.2mm) distance from outer edges of tires measured side-to-side

Vehicle Type: Crawler, Scale 4x4 crawler kit

Water-Resistant: Yes

Weight: 4lbs (1.8kg)

Wheel Diameter: 1.9" (48.26mm)

Wheel Hex Size: 12mm Hex

Wheel Type: Raceline 3-piece beadlock monster

Wheel Width: 1" (25.4mm)

Wheelbase: 12.5" (317.5mm)

Width: 10.25" (260.35mm)