Spektrum SX107 Micro Metal Gear Servo

Specs

Application: Small scale vehicles

Gear Material: Metal

Height: 0.87" (22.2mm)

Length: 0.89" (22.8mm)

Programmable: No

Servo Operating Voltage: 4.8 - 6.0V

Servo Type: Analog

Speed: 4.8V 0.09 sec/60°, 6.0V 0.08 sec/60°

Torque: 4.8V 34.9oz/in (2.5kg/cm), 6.0V 41.8oz/in (3.0kg/cm)

Type: Micro Metal Gear

Weight: 0.35oz (10g)

Width: 0.49" (12.5mm)

Often gotten with the item that you are presently reviewing.

Traxxas X-Maxx A-Arms, Upper & Lower, Green

This is a set of optional RPM Upper and Lower A-Arms in Green
for the Traxxas X-Maxx.

FEATURES:
Formed from engineering grade nylon, green in color
More powerful and lighter than stock A-Arms
Replaces the stock Traxxas #7729 upper A-Arms, and the stock Traxxas
    #7730 and #7731 lower A-Arms
Lower A-Arms have geater clearance than stock A-Arms, and a double
    support beam to spread impact energy over a larger location

CONSISTS OF:
One each Upper and Lower A-Arm

COMMENTS:
4 packages are needed to finish one automobile

Want one more great item to compliment the above mentioned item?





.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Recently developed transmission with Dig function makes it possible for a tighter turning radius by locking the rear axle for FWD power only.

Currie F9 Portal Axles increase ground clearance at the diff pumpkin for the very best crawling performance.

Includes all-metal equipments, from the center transmission to the lockers and portal axles.

Tube chassis design uses maximum clearance plus practical scale looks.

All pivot points are on stainless steel balls for a resilient, long-lasting suspension point.

Includes injection-molded, 3-piece, certified Raceline beadlock wheels.

Adjustable oil-filled shocks include hard anodized, threaded shock bodies, a single coilover spring, and a cap with a bleed port.

All-metal front universal axles offer smooth action and 45 degrees of guiding angle for an effective, high-performance drivetrain.

Durable, machined aluminum universal.

Finely tuned suspension geometry delivers the best crawling abilities





Overview
The Axial® Capra™ 1.9 Unlimited Trail Buggy Contractor's Kit is a "new from the ground up" design that any sophisticated RC enthusiast eager for advanced crawling will appreciate. Its Currie F9 Portal Axles offer extra ground clearance at the diff pumpkin for the very best crawling performance. With the consisted of Dig transmission, you can also switch on the fly in between 4WD and FWD straight from your 3-channel transmitter — locking the rear axle whenever you need the tighter turning radius of front drive power. The Capra features a practical tube chassis design and metal equipments everywhere, from the center transmission to the lockers and portal axles. It trips on certified Raceline 3-piece formed beadlock wheels that can be fitted with whatever 1.9 tires you choose. For pioneering performance in an RC path buggy set, select the Axial Capra.





Needed to Complete

Radio System

Steering Servo

ESC

Motor

Battery

Charger

Micro Servo (for Dig operation, SPMSSX107 advised)

What remains in the Box?

(1) Axial® Capra™ 1.9 Unlimited Trail Buggy 4WD Kit

(1) Product Manual








 



CURRIE F9 PORTAL AXLES
The Currie F9 Portal Axles add considerably more ground clearance at the diff pumpkin while also supplying an exceptional 7.39:1 gear ratio. Entirely ball bearing driven, and metal equipments throughout for sturdiness.
 



HI-PINION GEARS
The ring and pinion equipments are machined steel, consisting of the locker. The design utilizes a six bolt design for sturdiness.
 






 


 


DIG TRANSMISSION
The new transmission has a Dig function that uses the tightest turning radius on a production crawler in the industry. When required, just switch from 4WD to front-wheel-drive by locking the rear axle from your transmitter. The transmission also consists of a full set of ball bearings and all metal internal equipments for strength and durability.
NOTE: Dig performance needs an extra micro servo, not consisted of. Micro Dig Servo needed, SPMSSX107 advised (for Dig operation)
 







UNIVERSAL AXLE SET
Universal joint axles enable up to 45 degrees of steering and offer smoother action for a greater carrying out, effective drivetrain.

Up to 45 degrees of guiding

Smooth action for an effective drivetrain

Compact yet durable design

Solidified steel construction

 



WB8 HD WILDBOAR™ DRIVESHAFTS
WB8 HD Wildboar™ front and rear driveshafts include a larger diameter cross pin (2x11mm) in addition to an M4 Screw Shaft (2mm hex drive) for higher strength. A center splined slider floats in between each end and has added product to reduce flex and fatigue.
 







6MM STAINLESS-STEEL LINKS
Strong 6mm stainless steel links with high grade plastic rod ends for sturdiness. All links are metal consisting of the steering.
 



STAINLESS STEEL PIVOT BALLS
All pivot points are on stainless steel balls that offer a resilient, long-lasting suspension point.
 







SKIDPLATE WITH BOAT SIDES
The Capra features a small skidplate footprint with boat sides to assist maneuver and slide over rough, tough challenges.
 



STAINLESS STEEL STEERING LINKS
The guiding links are also made from 6mm stainless steel, providing accurate steering and sturdiness.
 







LARGE BORE ALUMINUM SHOCKS
The oil-filled shocks are an all-new design with hard anodized, threaded shock bodies and a single coilover spring. Their increased bore size creates more fluid volume for much better performance. A bleed screw helps to bleed air from the shock throughout assembly for higher consistency. The shocks are also tunable so you can accomplish the best dampening rate.
 



4-LINK SUSPENSION
We have actually fine-tuned the suspension geometry with multiple installing places for the upper link installs to offer the best crawling abilities.
 







A1.9, 3-PIECE BEADLOCK WHEELS
For striking scale looks and serious path performance, we have actually outfitted the Capra™ with formally certified 3-piece Raceline Monster beadlock wheels.
 



LED LIGHT BAR
A roofing installed LED light bar helps light the method on those late night crawls with your pals. Additional LED lights can be contributed to the front headlights (optional LED lights not consisted of).
 







REALISTIC INTERIOR
Practical scale details consist of: polycarbonate interior tray with molded driver figures, complete color pre-cut decals with simulated carbon fiber panels, mock GPS navigation gauges and switches, two black styrene helmets with visor decals, and more!
 



GRILLE AND HEADLIGHT BUCKETS
The formed plastic front grille features two clear plastic headlight lenses with light pails (optional LED lights not consisted of). Behind the grille, under the hood, are two hood installs with clips. Remove the clips to raise the hood up and access to the battery tray.
 







ESC / RECEIVER TRAY
Tucked under the front dash is a cage installed ESC / receiver tray with incorporated, adjustable cable routing to keep your circuitry arranged.
 



BATTERY TRAY
The battery tray is forward installed, and located under the hood. The tray size is built for shorty packs, at a maximum size of 26mm x 98mm x 47mm.
 







HOOD RELEASE
Remove the clips concealed on the underside of the tube frame to raise the hood up and access to the battery tray.
 



SERVO HORN WITH METAL INSERT
The servo horn features a 23T press fit metal insert for sturdiness.
 









Specifications

Approximate Assembly Time: 7-10 Hours

Ball Bearings: Full set

Batteries: Shorty configuration

Body: Unpainted panels

Brakes: Integral with ESC

Bushing Material: Metal

Charger: Sold separately

Chassis: Injection molded tubular

Completion Level: Kit

Differential: Locked

Drivetrain: 4WD Shaft Drive

Final Drive Ratio: 37:1

Gear Pitch: 32-Pitch

Ground Clearance: 3" (76.2mm)

Height: 8.25" (209.5mm)

Internal Gear Ratio: 5.14:1

Length: 17" (431.8mm)

Max Battery Dimensions: 1.02 x 3.8 x 1.8" (26 x 98 x 47mm)

Motor Size: 540 sold separately

Pinion: 14T

Radio: At least 3-channel (sold separately)

Servos: High torque steering servo (sold separately

Shock Type: Aluminum body, oil-filled, coil-over spring, soft and firm springs included

Size/Scale: 1/10

Speed Control: Axial AE-5L (sold separately) to operate light bar

Suspension: 4-link w/stainless steel pivot balls

Tire Compound: Tires sold separately

Track: Front and Rear, 8.75" (222.2mm) distance from outer edges of tires measured side-to-side

Vehicle Type: Crawler, Scale 4x4 crawler kit

Water-Resistant: Yes

Weight: 4lbs (1.8kg)

Wheel Diameter: 1.9" (48.26mm)

Wheel Hex Size: 12mm Hex

Wheel Type: Raceline 3-piece beadlock monster

Wheel Width: 1" (25.4mm)

Wheelbase: 12.5" (317.5mm)

Width: 10.25" (260.35mm)