Spektrum SX107 Micro Metal Gear Servo

Specs

Application: Small scale vehicles

Equipment Product: Metal

Height: 0.87" (22.2mm)

Length: 0.89" (22.8mm)

Programmable: No

Servo Operating Voltage: 4.8 - 6.0V

Servo Type: Analog

Speed: 4.8V 0.09 sec/60°, 6.0V 0.08 sec/60°

Torque: 4.8V 34.9oz/in (2.5kg/cm), 6.0V 41.8oz/in (3.0kg/cm)

Type: Micro Metal Equipment

Weight: 0.35oz (10g)

Width: 0.49" (12.5mm)

Frequently bought with the item that you are presently reviewing.

Traxxas X-Maxx A-Arms, Upper & Lower, Green

This is a pair of optional RPM Upper and Lower A-Arms in Green
for the Traxxas X-Maxx.

FUNCTIONS:
Formed from engineering grade nylon, green in color
Stronger and lighter than stock A-Arms
Changes the stock Traxxas #7729 upper A-Arms, and the stock Traxxas
    #7730 and #7731 lower A-Arms
Lower A-Arms have geater clearance than stock A-Arms, and a double
    support beam to spread effect energy over a bigger location

CONSISTS OF:
One each Upper and Lower A-Arm

REMARKS:
4 plans are required to complete one automobile

Want an additional wonderful item to enhance the above discussed item?





.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Recently developed transmission with Dig function enables a tighter turning radius by locking the rear axle for FWD power only.

Currie F9 Portal Axles boost ground clearance at the diff pumpkin for the very best crawling performance.

Includes all-metal gears, from the center transmission to the lockers and portal axles.

Tube chassis design uses optimum clearance plus practical scale looks.

All pivot points are on stainless-steel balls for a durable, lasting suspension point.

Includes injection-molded, 3-piece, certified Raceline beadlock wheels.

Adjustable oil-filled shocks include tough anodized, threaded shock bodies, a single coilover spring, and a cap with a bleed port.

All-metal front universal axles supply smooth action and 45 degrees of guiding angle for an effective, high-performance drivetrain.

Durable, machined aluminum universal.

Finely tuned suspension geometry provides the best crawling capabilities





Overview
The Axial® Capra™ 1.9 Unlimited Trail Buggy Contractor's Set is a "brand-new from the ground up" design that any innovative RC enthusiast eager for cutting-edge crawling will appreciate. Its Currie F9 Portal Axles supply additional ground clearance at the diff pumpkin for the very best crawling efficiency. With the consisted of Dig transmission, you can also turn on the fly in between 4WD and FWD straight from your 3-channel transmitter — locking the rear axle whenever you require the tighter turning radius of front drive power. The Capra features a realistic tube chassis design and metal gears all over, from the center transmission to the lockers and portal axles. It trips on certified Raceline 3-piece molded beadlock wheels that can be fitted with whatever 1.9 tires you prefer. For pioneering efficiency in an RC trail buggy set, pick the Axial Capra.





Needed to Complete

Radio System

Steering Servo

ESC

Motor

Battery

Charger

Micro Servo (for Dig operation, SPMSSX107 advised)

What's in package?

(1) Axial® Capra™ 1.9 Unlimited Trail Buggy 4WD Set

(1) Product Handbook








 



CURRIE F9 PORTAL AXLES
The Currie F9 Portal Axles include considerably more ground clearance at the diff pumpkin while also offering an exceptional 7.39:1 gear ratio. Entirely ball bearing driven, and metal gears throughout for sturdiness.
 



HI-PINION GEARS
The ring and pinion gears are machined steel, consisting of the locker. The design utilizes a six bolt design for sturdiness.
 






 


 


DIG TRANSMISSION
The brand-new transmission has a Dig function that uses the tightest turning radius on a production spider in the market. When required, simply switch from 4WD to front-wheel-drive by locking the rear axle from your transmitter. The transmission also consists of a complete set of ball bearings and all metal internal gears for strength and durability.
NOTE: Dig functionality requires an extra micro servo, not consisted of. Micro Dig Servo required, SPMSSX107 advised (for Dig operation)
 







UNIVERSAL AXLE SET
Universal joint axles enable as much as 45 degrees of steering and supply smoother action for a greater carrying out, effective drivetrain.

Up to 45 degrees of guiding

Smooth action for an effective drivetrain

Compact yet long lasting design

Hardened steel building and construction

 



WB8 HD WILDBOAR™ DRIVESHAFTS
WB8 HD Wildboar™ front and rear driveshafts include a bigger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for greater strength. A center splined slider floats in between each end and has actually included material to minimize flex and tiredness.
 







6MM STAINLESS STEEL HYPERLINKS
Strong 6mm stainless-steel relate to high grade plastic rod ends for sturdiness. All links are metal consisting of the steering.
 



STAINLESS STEEL PIVOT BALLS
All pivot points are on stainless-steel balls that supply a durable, lasting suspension point.
 







SKIDPLATE WITH BOAT SIDES
The Capra features a small skidplate footprint with boat sides to assist maneuver and slide over rough, tough obstacles.
 



STAINLESS STEEL STEERING LINKS
The guiding links are also made from 6mm stainless-steel, providing accurate steering and sturdiness.
 







LARGE BORE ALUMINUM SHOCKS
The oil-filled shocks are a brand new design with tough anodized, threaded shock bodies and a single coilover spring. Their increased bore size creates more fluid volume for better efficiency. A bleed screw helps to bleed air from the shock during assembly for greater consistency. The shocks are also tunable so you can accomplish the best dampening rate.
 



4-LINK SUSPENSION
We've fine-tuned the suspension geometry with multiple mounting areas for the upper link installs to supply the best crawling capabilities.
 







A1.9, 3-PIECE BEADLOCK WHEELS
For striking scale looks and major trail efficiency, we've outfitted the Capra™ with officially certified 3-piece Raceline Monster beadlock wheels.
 



LED LIGHT BAR
A roofing system installed LED light bar helps light the way on those late night crawls with your friends. Additional LED lights can be added to the front headlights (optional LED lights not consisted of).
 







REALISTIC INTERIOR
Sensible scale information consist of: polycarbonate interior tray with molded motorist figures, complete color pre-cut decals with simulated carbon fiber panels, mock GPS navigation determines and switches, 2 black styrene helmets with visor decals, and more!
 



GRILLE AND HEADLIGHT BUCKETS
The molded plastic front grille features 2 clear plastic headlight lenses with light pails (optional LED lights not consisted of). Behind the grille, under the hood, are 2 hood installs with clips. Eliminate the clips to raise the hood up and gain access to the battery tray.
 







ESC / RECEIVER TRAY
Tucked under the front dash is a cage installed ESC / receiver tray with incorporated, adjustable cable routing to keep your circuitry arranged.
 



BATTERY TRAY
The battery tray is forward installed, and located under the hood. The tray size is built for shorty packs, at a maximum size of 26mm x 98mm x 47mm.
 







HOOD RELEASE
Eliminate the clips concealed on the underside of television frame to raise the hood up and gain access to the battery tray.
 



SERVO HORN WITH METAL INSERT
The servo horn features a 23T press fit metal insert for sturdiness.
 









Specifications

Approximate Assembly Time: 7-10 Hours

Ball Bearings: Full set

Batteries: Shorty configuration

Body: Unpainted panels

Brakes: Integral with ESC

Bushing Material: Metal

Charger: Sold separately

Chassis: Injection molded tubular

Completion Level: Kit

Differential: Locked

Drivetrain: 4WD Shaft Drive

Final Drive Ratio: 37:1

Gear Pitch: 32-Pitch

Ground Clearance: 3" (76.2mm)

Height: 8.25" (209.5mm)

Internal Gear Ratio: 5.14:1

Length: 17" (431.8mm)

Max Battery Dimensions: 1.02 x 3.8 x 1.8" (26 x 98 x 47mm)

Motor Size: 540 sold separately

Pinion: 14T

Radio: At least 3-channel (sold separately)

Servos: High torque steering servo (sold separately

Shock Type: Aluminum body, oil-filled, coil-over spring, soft and firm springs included

Size/Scale: 1/10

Speed Control: Axial AE-5L (sold separately) to operate light bar

Suspension: 4-link w/stainless steel pivot balls

Tire Compound: Tires sold separately

Track: Front and Rear, 8.75" (222.2mm) distance from outer edges of tires measured side-to-side

Vehicle Type: Crawler, Scale 4x4 crawler kit

Water-Resistant: Yes

Weight: 4lbs (1.8kg)

Wheel Diameter: 1.9" (48.26mm)

Wheel Hex Size: 12mm Hex

Wheel Type: Raceline 3-piece beadlock monster

Wheel Width: 1" (25.4mm)

Wheelbase: 12.5" (317.5mm)

Width: 10.25" (260.35mm)