Spektrum IC3 Battery Lead to 4mm Female Bullet

Specifications

Device Type: Ports & Adapters

Connector Type: IC3

Right here is a terrific thing that numerous others have bought at the same time.



Specifications

Application: UMX 2S Airplanes

Battery Type: LiPo (3.7V per cell)

Battery Voltage: 7.4V

Capability: 280mAh

Charge Defense Circuitry: No

Port Type: PH

Discharge Lead Length: 2 in (50mm)

Difficult Case: No

Maximum Constant Discharge Current: 8.4A

Maximum Constant Discharge Rate: 30C

Number of Cells: 2

Product Height: 0.5 in (13mm)

Product Length: 1.5 in (39mm)

Product Weight: 0.6 oz (16.9g)

Product Width: 0.8 in (20mm)

Several others have acquired this thing together with the thing that you are currently reviewing.



Specifications

Part Type: Electronic Devices

Right here is a terrific thing that numerous others have bought at the same time.

EC5 Battery Connector (2)

Key Features


Capable of more than 120A continuous current with 10-awg wire

Ergonomically pleasing and simple to grip

Protected to prevent shorting and reverse polarity

Superior technology matched to today's sophisticated applications

Created with benefit and dependability in mind





Overview

E-flite's high-quality EC5 ports should be a staple for each workbench. EC5 (E-flite Port 5mm) ports, leads with ports, and accessories are best for electric power applications and deal with any battery, charger, ESC, Power Meter, and so on. They are perfect for high power applications.



Specifications

Device Type: Ports & Adapters

Connector Type: EC5

You will certainly like this item if you have the item earlier discussed.

Parallel Charging Board for UMX Batteries

Charge twelve UMX / Blade 130X lipos at the very same time!


This new paraboard enables you to charge up to twelve lipos with UMX-style ports simultaneously. Due to the fact that it charges in parallel, you can charge as few as one or as many as twelve batteries of varying capacities at the very same time.
Perfect for batteries used in the Blade 130 X, mCP X BL, UMX Monster, Mig, Carbon Cub, and Sbach 342!

HOW TO USE IT

Merely connect the banana plugs and JST-XH balance leads to your 6S lipo charger, plug in the batteries you'd like to credit the paraboard, program your charger and charge!
The paraboard enables you to connect up to 12 batteries in parallel so that you can charge them as a single bigger mA two-cell battery (i.e. 2s12p). The only requirement is that all the batteries be within .10 of a volt of each other before charging. For example, if you either time your flights or fly till cutoff. You want to prevent linking a fully charged battery to a group of released cells, considering that a rapid rush of current would occur.

Calclulate your charge rate by adding together the mAh of all the batteries you intend to charge. To charge your batteries at a 1C rate, divide your combined mAh by 1,000 and this will tell you what your amperage setting should be. e.x. (6) 7.4V 300mAh batteries would be: (6 * 300) = 1800 / 1000 = 1.8A


Maximum charge rate = 10A