Spektrum Firma 8A Sensored Brushless Smart ESC / Motor Combo: 1/24 Rock C

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
The Spektrum™ Firma™ 1/24th Brushless ESC + Motor Combination is a terrific choice for micro crawlers and more running on 2S LiPo power. It includes a high-precision magnetic encoder and rotor position sensing unit that offers outstanding 1 to 1 control feel when driving at any speed and at any angle. Completely suited for path driving and rock crawling competitors. This improvement in sensored motor control enables the ESC to match the throttle input to the motors RPM with unmatched accuracy. This combination is particularly created for the Axial® SCX24 & AX24 platform to offer the supreme efficiency for maximum power and realism. Preinstalled with 2mm bullet connectors for simple installation.





Features

Reliable 4500Kv Sensored Brushless Motor with outstanding slow speed control and smooth operation

Drop-in conversion to all Axial 1/24th Scale SCX24 & AX24 RTR vehicles.

*Note: Axial SCX24 vehicles equipped with HRZ00014 2-in1 Receiver and HRZ00015 transmitter requires an SLT3 Transmitter and receiver upgrade for performance. Please refer to the handbook for more details. (2021 Ford Bronco, Jeep GT Gladiator, and Jeep Wrangler will require this upgrade)

All included – consists of motor, ESC, sensing unit wire and pinion gears

Spider Mode: Forward and instantaneous reverse with drag brake

8 Amp (40 Amp Burst) 1-2S Suitable ESC

Compact Size and All Set to Install

JST PH 2.0 adapter to fit the Dynamite 7.4V 350mAh Two Lipo Battery





 






DROP-IN UPGRADE FOR AXIAL SCX24 & AX24 VEHICLES
The Spektrum Firma 1/24th Scale Sensored Brushless motor and ESC offers Axial SCX24 & AX24 lover with a drop-in motor & ESC system to take their crawling to the next level.
 



ALL-INCLUDED
System consists of motor, ESC, sensing unit wire and pinion gears and is preinstalled with 2mm bullet connectors and JST PH 2.0 battery adapter to fit the Dynamite 7.4V 350mAh Lipo battery included with the Axial SCX24 & AX24 vehicles.
 



Requirements

Vehicle Cutoff: Yes

BEC: Yes

Brakes: Essential with ESC

Port Type: PH 2.0 (High-Current Ultra Micro)

ESC Type: Brushless Sensored

Forward: Yes

Input Voltage: 1 - 2S LiPo

Low-Voltage Cutoff Programmable: No

Maximum Burst Current: 40A

Maximum Continuous Present: 8A

Motor Type: Brushless Sensored

Number of Poles: 2

Output Port: 2mm Bullet

Overload Defense: Yes

Reverse: Yes

RPM/Volt (Kv): 4500

Sensored: Yes