Spektrum 25/200/600mW Adjustable Power Video Transmitter

Summary

Summary

FPV flyers searching for a small feature abundant video transmitter will discover the Spektrum VT1000 checks all the right boxes. The VT1000 consists of frequency support on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an incorporated microphone, and a powerful frequency management tool developed right into Spektrum innovation.* Changing the band, channel and power level can be handled from two push buttons on the circuit board, but much of the time those will only be booked for backup. The Spektrum integrated frequency control system lets a pilot make all the modifications for an FPV system straight from the transmitter.
All FPV pilots can take advantage of remote frequency control. Envision eliminating those irritating dip switches or buttons. Envision altering the frequencies before a race without having to take the models off the starting grid. Envision the mounting choices that are opened up without the constraints of needing physical access to the video transmitter. Select the band and channel you wish to fly on and set the output power straight from compatible Spektrum transmitters. Pilots can likewise turn the video transmitter off or run at an extremely low power setting for test functions, that makes the VT1000 suitable for complex jobs needing a great deal of time screening on the bench.
The VT1000 can be linked to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it needs to connect with the receiver system is to “Y” off the serial signal wire. An MMCX adapter for the antenna is utilized on the circuit board for toughness and light weight. Installing holes in the circuit board allow easy mounting with common plastic standoffs such as SPMVX180.** An SMA adaptor cable television and wire harness are consisted of. A 5.8GHz antenna with SMA or MMCX adapter is needed, not consisted of.
*All Spektrum Airware based transmitters are compatible with the Spektrum frequency control system with the most current firmware updates. If your transmitter does not include the VTX menu it may be needed to register your transmitter at SpektrumRC.com and update the firmware to access the VTX menu.
**Crash damage from utilizing the mounting holes is not covered under the warrantee.
Important: Amateur radio license needed for usage in North America. Please speak with the ARRL for more information about your local amateur radio club and getting your HAM license. www.ARRL.org