Spektrum 25/200/600mW Adjustable Power Video Transmitter

Overview

Overview

FPV leaflets looking for a little feature rich video transmitter will discover the Spektrum VT1000 checks all the right boxes. The VT1000 consists of frequency support on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an integrated microphone, and a powerful frequency management tool constructed right into Spektrum innovation.* Changing the band, channel and power level can be handled from two push howevertons on the circuit board, but much of the time those will just be booked for backup. The Spektrum incorporated frequency control system lets a pilot make all the adjustments for an FPV system directly from the transmitter.
All FPV pilots can benefit from remote frequency control. Picture eliminating those frustrating dip switches or buttons. Picture changing the frequencies prior to a race without having to take the models off the beginning grid. Picture the installing choices that are opened up without the restraints of needing physical access to the video transmitter. Select the band and channel you want to fly on and set the output power directly from suitable Spektrum transmitters. Pilots can also turn the video transmitter off or perform at a really low power setting for test functions, makings the VT1000 ideal for complex tasks requiring a lot of time testing on the bench.
The VT1000 can be linked to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it needs to connect with the receiver system is to “Y” off the serial signal wire. An MMCX connector for the antenna is utilized on the circuit board for durability and lightweight. Mounting holes in the circuit board make it possible for simple installing with common plastic standoffs such as SPMVX180.** An SMA adaptor cable and wire harness are consisted of. A 5.8GHz antenna with SMA or MMCX connector is required, not consisted of.
*All Spektrum Airware based transmitters work with the Spektrum frequency control system with the most recent firmware updates. If your transmitter does not include the VTX menu it might be needed to register your transmitter at SpektrumRC.com and update the firmware to access the VTX menu.
**Crash damage from utilizing the installing holes is not covered under the warrantee.
Important: Amateur radio license required for use in The United States and Canada. Please speak with the ARRL for more information about your local amateur radio club and getting your HAM license. www.ARRL.org