Spektrum 25/200/600mW Adjustable Power Video Transmitter

Summary

Summary

FPV leaflets looking for a little function abundant video transmitter will find the Spektrum VT1000 checks all the right boxes. The VT1000 consists of frequency support on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an integrated microphone, and an effective frequency management tool constructed right into Spektrum innovation.* Changing the band, channel and power level can be managed from two push buttons on the circuit board, but much of the time those will just be reserved for backup. The Spektrum integrated frequency control system lets a pilot make all the modifications for an FPV system straight from the transmitter.
All FPV pilots can take advantage of remote frequency control. Think of removing those frustrating dip switches or buttons. Think of changing the frequencies prior to a race without having to take the models off the beginning grid. Think of the mounting alternatives that are opened up without the restraints of requiring physical access to the video transmitter. Select the band and channel you wish to fly on and set the output power straight from suitable Spektrum transmitters. Pilots can likewise turn the video transmitter off or perform at a really low power setting for test purposes, makings the VT1000 suitable for complicated jobs needing a lot of time screening on the bench.
The VT1000 can be connected to any flight controller using a Spektrum DSMX serial receiver or any Spektrum DSMX receiver using remote receivers. All it needs to get in touch with the receiver system is to “Y” off the serial signal wire. An MMCX adapter for the antenna is used on the circuit board for toughness and lightweight. Installing holes in the circuit board enable simple mounting with typical plastic standoffs such as SPMVX180.** An SMA adaptor cable television and wire harness are included. A 5.8GHz antenna with SMA or MMCX adapter is needed, not included.
*All Spektrum Airware based transmitters are compatible with the Spektrum frequency control system with the most current firmware updates. If your transmitter does not include the VTX menu it might be required to register your transmitter at SpektrumRC.com and update the firmware to access the VTX menu.
**Crash damage from using the mounting holes is not covered under the warrantee.
Important: Amateur radio license needed for use in North America. Please seek advice from the ARRL for more information about your local amateur radio club and getting your HAM license. www.ARRL.org