Spektrum 25/200/600mW Adjustable Power Video Transmitter

Introduction

Introduction

FPV flyers searching for a small feature abundant video transmitter will discover the Spektrum VT1000 checks all the right boxes. The VT1000 includes frequency assistance on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an incorporated microphone, and an effective frequency management tool built right into Spektrum innovation.* Altering the band, channel and power level can be dealt with from two push buttons on the circuit board, but much of the time those will just be scheduled for backup. The Spektrum integrated frequency control system lets a pilot make all the modifications for an FPV system directly from the transmitter.
All FPV pilots can take advantage of remote frequency control. Imagine getting rid of those annoying dip switches or buttons. Imagine changing the frequencies prior to a race without needing to take the models off the starting grid. Imagine the installing alternatives that are opened up without the restraints of requiring physical access to the video transmitter. Select the band and channel you wish to fly on and set the output power directly from compatible Spektrum transmitters. Pilots can also turn the video transmitter off or run at a really low power setting for test functions, makings the VT1000 ideal for complicated projects requiring a great deal of time screening on the bench.
The VT1000 can be connected to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it needs to get in touch with the receiver system is to “Y” off the serial signal wire. An MMCX connector for the antenna is utilized on the circuit board for sturdiness and lightweight. Installing holes in the circuit board allow simple installing with common plastic standoffs such as SPMVX180.** An SMA adaptor cable and wire harness are consisted of. A 5.8GHz antenna with SMA or MMCX connector is required, not consisted of.
*All Spektrum Airware based transmitters are compatible with the Spektrum frequency control system with the most current firmware updates. If your transmitter does not include the VTX menu it may be essential to register your transmitter at SpektrumRC.com and upgrade the firmware to access the VTX menu.
**Crash damage from utilizing the installing holes is not covered under the warrantee.
Important: Amateur radio license required for usage in The United States and Canada. Please speak with the ARRL for more details about your regional amateur radio club and getting your HAM license. www.ARRL.org