Spektrum 25/200/600mW Adjustable Power Video Transmitter

Overview

Overview

FPV flyers looking for a little function abundant video transmitter will find the Spektrum VT1000 checks all the right boxes. The VT1000 consists of frequency assistance on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an integrated microphone, and an effective frequency management tool built right into Spektrum technology.* Changing the band, channel and power level can be managed from two push buttons on the circuit board, but much of the time those will just be scheduled for backup. The Spektrum incorporated frequency control system lets a pilot make all the changes for an FPV system directly from the transmitter.
All FPV pilots can gain from remote frequency control. Picture getting rid of those annoying dip switches or buttons. Picture changing the frequencies before a race without needing to take the models off the starting grid. Picture the installing options that are opened up without the restraints of requiring physical access to the video transmitter. Select the band and channel you wish to fly on and set the output power directly from suitable Spektrum transmitters. Pilots can also turn the video transmitter off or perform at a very low power setting for test purposes, makings the VT1000 perfect for complicated tasks needing a lot of time screening on the bench.
The VT1000 can be connected to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it needs to get in touch with the receiver system is to “Y” off the serial signal wire. An MMCX connector for the antenna is utilized on the circuit board for resilience and light weight. Mounting holes in the circuit board enable simple installing with typical plastic standoffs such as SPMVX180.** An SMA adaptor cable and wire harness are consisted of. A 5.8GHz antenna with SMA or MMCX connector is required, not consisted of.
*All Spektrum Airware based transmitters work with the Spektrum frequency control system with the most recent firmware updates. If your transmitter does not include the VTX menu it may be necessary to register your transmitter at SpektrumRC.com and update the firmware to access the VTX menu.
**Crash damage from utilizing the installing holes is not covered under the warrantee.
Important: Amateur radio license required for use in The United States and Canada. Please seek advice from the ARRL for additional information about your regional amateur radio club and getting your HAM license. www.ARRL.org