Spektrum 25/200/600mW Adjustable Power Video Transmitter

Overview

Overview

FPV flyers trying to find a small feature rich video transmitter will find the Spektrum VT1000 checks all the right boxes. The VT1000 consists of frequency assistance on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an incorporated microphone, and a powerful frequency management tool developed right into Spektrum technology.* Changing the band, channel and power level can be handled from 2 push buttons on the circuit board, but much of the time those will just be booked for backup. The Spektrum incorporated frequency control system lets a pilot make all the changes for an FPV system straight from the transmitter.
All FPV pilots can benefit from remote frequency control. Think of getting rid of those frustrating dip switches or buttons. Think of changing the frequencies before a race without having to take the models off the starting grid. Think of the installing options that are opened up without the restraints of needing physical access to the video transmitter. Select the band and channel you wish to fly on and set the output power straight from compatible Spektrum transmitters. Pilots can also turn the video transmitter off or run at an extremely low power setting for test purposes, which makes the VT1000 perfect for complicated tasks needing a lot of time testing on the bench.
The VT1000 can be connected to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it needs to connect with the receiver system is to “Y” off the serial signal wire. An MMCX adapter for the antenna is utilized on the circuit board for durability and lightweight. Mounting holes in the circuit board enable easy installing with typical plastic standoffs such as SPMVX180.** An SMA adaptor cable television and wire harness are included. A 5.8GHz antenna with SMA or MMCX adapter is needed, not included.
*All Spektrum Airware based transmitters work with the Spektrum frequency control system with the most current firmware updates. If your transmitter does not consist of the VTX menu it may be needed to register your transmitter at SpektrumRC.com and upgrade the firmware to access the VTX menu.
**Crash damage from utilizing the installing holes is not covered under the warrantee.
Important: Amateur radio license needed for use in North America. Please seek advice from the ARRL for more information about your local amateur radio club and getting your HAM license. www.ARRL.org