RJ Speed Nitro Drag Pro Mod Car Kit

This is the radiance powered, radio controlled
Nitro Pro Mod Vehicle Set from RJ Speed.

FEATURES:
Chassis: Fiberglass, 0.06" (1.5mm) thick
Engine Mounts: Adjustable aluminum
Axle Gear: 32 pitch
Rear Axle: Solid, constructed of stainless steel
Tires: O-ring front, Rear foam 1.5" (38mm) broad with 6 spoke black
    wheels
Body: Clear lexan
Fuel Tank: 1oz (29.6cc), with rear install

INCLUDES:
Nitro Pro Mod Set with body, 32P axle gear, wheels, fuel tank
    hex wrenches, window mask and instructions

NEEDS:
Engine: .12 -.18 cu in (2.0 - 2.9cc) brief shaft suggested
**RJ Speed #5145 Engine Mount Spacers, RJSC5145 if using engine with
pull starter
Clutch Assembly: to match selected engine
Radio: 2-channel with two basic servos
Misc Products: Air filter, muffler, fuel tubing, tools and track equip.

SPECS:
Body;
Length: 18.8" (478mm)
Width: 7.3" (185mm) at front wheels, narrowest point
7.75" (196mm) behind rear wheels, best point
Height: 4.5" (114mm)

REMARKS:
To upgrade from bushing to ball bearings, order;
Qty. Size Qty. Bearing Set
4 1/8 x 5/16" Flanged 2 DTXC1403
2 1/4 x 3/8" Flanged 1 DTXC1433