Scale By Chris Fuel Jug (Red) (Miniature Scale Accessory)

The Scale By Chris Fuel Container is a 3D printed miniaturized reproduction that adds that ideal completing touch to your scale build. This red fuel jug features a printed deal with, lid and recessed details. This can will look fantastic in the back of a truggy, or in the bed of a truck with a full depth bed. The can steps approximately 30mm deep, 20mm broad and 35mm high. This can is quickly protected utilizing a rubberized glue, or by drilling a hole in the bottom and utilizing a screw through the body to hold the can in place.

Printed at .2mm layer thickness with 20% infill, Scale by Chris scale accessories are designed, printed and hand detailed in house. Printed in small batches, nothing with the SBC name is ever contracted out, suggesting Chris puts his hands on every part prior to it heads out the door. All this effort is done to develop a higher quality finished product, with the details you need to take your build to the next level.

NOTE: As is the case with many 3D printed items, some light finish work might be required to eliminate excess product. Simply utilize a sharp hobby knife to thoroughly eliminate small strings and lagger layer lines as required.