Savox Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a budget friendly waterproof digital servo with fantastic torque for lots of applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It integrates leading edge innovation with very high 12-bit (4096) resolution and metal gears for your greater accuracy when evading puddles. This is a great upgrade if your planning to drive your RC car in any condition...rain, sleet, or snow.

Features:

• Integrates cutting edge
  innovation with very high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Incredibly strong metal gears ensure long-life and durability.
• Our servos are completely green ? from materials to production, these servos are ecologically friendly.
• Ideal for RC vehicles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Equipment: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

This product is often bought with the above mentioned product.

Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Tough anodized aluminum building
Compression install, two screws install on either side of arm and
    tighten center hole around servo spline

CONSISTS OF:
Axial 25T Aluminum Servo Horn
2 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo installing hole to end of arm
Hole Diameter: 3mm
Pitch:3x30

This product is often bought with the above mentioned product.



This is a optional Racers Edge Aluminum single arm servo horn, planned for use with Futaba servos. This sturdy aluminum servo horn is similar in design to the Racers Edge Pro Adjustable servo horns, but includes a third linkage installing point and does not use lock down screws.

This product compliments the above reviewed product.



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Perfect upgrade for radios discovered in RTR cars
Throttle and guiding trim and reverse
Guiding dual rate dial
Throttle end point change
Channel 3 switch
Throttle fail safe
One year minimal guarantee from Pastime Services beginning at date
    of purchase

CONSISTS OF:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Direction
    Handbook and On/Off Switch

REQUIRES:
Servos of modeler's option
Four AA batteries for transmitter

SPECIFICATIONS:
Transmitter:
Sending Frequency: 2.4GHz band
Power Requirement: Four AA cells
Existing Drain: 100mA or less

    Receiver;
Dimensions: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shown servo)
Battery Fail Safe Voltage: 3.8V*
Existing Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work properly when other type of battery is used

REMARKS:
2.4GHz FHSS is not compatible with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
type of servos or peripherals.
High-Speed mode (in 4PL tx just), with an output of 6.8ms accepts
    digital servos including the BLS series and most peripheral
    equipment such as brushless ESCs