Savox Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a budget plan friendly waterproof digital servo with fantastic torque for numerous applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge innovation with super high 12-bit (4096) resolution and metal equipments for your greater accuracy when evading puddles. This is an excellent upgrade if your looking to drive your RC vehicle in any condition...rain, sleet, or snow.

Features:

• Integrates cutting edge
  innovation with super high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Very strong metal equipments ensure long-life and durability.
• Our servos are absolutely green ? from products to production, these servos are environmentally friendly.
• Ideal for RC cars, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Rating: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

This item is often acquired with the above stated item.

Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Hard anodized aluminum construction
Compression install, 2 screws set up on either side of arm and
    tighten center hole around servo spline

CONSISTS OF:
Axial 25T Aluminum Servo Horn
2 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo mounting hole to end of arm
Hole Diameter: 3mm
Pitch:3x30

This item is often acquired with the above stated item.



This is a optional Racers Edge Aluminum single arm servo horn, planned for use with Futaba servos. This sturdy aluminum servo horn is similar in design to the Racers Edge Pro Adjustable servo horns, but features a 3rd linkage mounting point and does not utilize lock down screws.

This item compliments the above gone over item.



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Suitable upgrade for radios discovered in RTR cars
Throttle and steering trim and reverse
Steering double rate dial
Throttle end point adjustment
Channel three switch
Throttle fail safe
One year limited guarantee through Hobby Services beginning at date
    of purchase

CONSISTS OF:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Direction
    Handbook and On/Off Switch

NEEDS:
Servos of modeler's option
Four AA batteries for transmitter

SPECIFICATIONS:
Transmitter:
Transferring Frequency: 2.4GHz band
Power Requirement: Four AA cells
Current Drain: 100mA or less

    Receiver;
Measurements: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shared with servo)
Battery Fail Safe Voltage: 3.8V*
Current Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work appropriately when other kind of battery is used

COMMENTS:
2.4GHz FHSS is not compatible with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
kind of servos or peripherals.
High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts
    digital servos consisting of the BLS series and most peripheral
    equipment such as brushless ESCs