Savox Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a budget plan friendly water resistant digital servo with great torque for lots of applications. This brushed servo features a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge technology with extremely high 12-bit (4096) resolution and metal equipments for your greater precision when evading puddles. This is a great upgrade if your looking to drive your RC car in any condition...rain, sleet, or snow.

Features:

• Combines cutting edge
  technology with extremely high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Very strong metal equipments ensure long-life and durability.
• Our servos are totally green ? from products to production, these servos are environmentally friendly.
• Ideal for RC vehicles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Equipment: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

This thing is regularly acquired with the above mentioned thing.

Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Hard anodized aluminum construction
Compression install, two screws set up on either side of arm and
    tighten center hole around servo spline

CONSISTS OF:
Axial 25T Aluminum Servo Horn
Two 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo installing hole to end of arm
Hole Diameter: 3mm
Pitch:3x30

This thing is regularly acquired with the above mentioned thing.



This is a optional Racers Edge Aluminum single arm servo horn, meant for usage with Futaba servos. This heavy duty aluminum servo horn is comparable in design to the Racers Edge Pro Adjustable servo horns, however includes a 3rd linkage installing point and does not use lock down screws.

This thing compliments the above reviewed thing.



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Ideal upgrade for radios discovered in RTR vehicles
Throttle and steering trim and reverse
Guiding double rate dial
Throttle end point change
Channel 3 switch
Throttle fail safe
One year restricted service warranty from Hobby Services beginning at date
    of purchase

CONSISTS OF:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Guideline
    Manual and On/Off Change

REQUIRES:
Servos of modeler's choice
4 AA batteries for transmitter

SPECIFICATIONS:
Transmitter:
Transmitting Frequency: 2.4GHz band
Power Requirement: 4 AA cells
Current Drain: 100mA or less

    Receiver;
Dimensions: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shared with servo)
Battery Fail Safe Voltage: 3.8V*
Current Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work correctly when other type of battery is used

COMMENTS:
2.4GHz FHSS is not suitable with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
type of servos or peripherals.
High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts
    digital servos consisting of the BLS series and most peripheral
    devices such as brushless ESCs