Savox Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a spending plan friendly waterproof digital servo with excellent torque for many applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge innovation with extremely high 12-bit (4096) resolution and metal gears for your higher precision when evading puddles. This is a great upgrade if your looking to drive your RC vehicle in any condition...rain, sleet, or snow.

Functions:

• Integrates leading edge
  innovation with extremely high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Incredibly strong metal gears guarantee long-life and durability.
• Our servos are completely green ? from materials to production, these servos are environmentally friendly.
• Ideal for RC automobiles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Equipment: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

This thing is frequently bought with the above mentioned thing.

Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Difficult anodized aluminum construction
Compression install, 2 screws install on either side of arm and
    tighten center hole around servo spline

INCLUDES:
Axial 25T Aluminum Servo Horn
Two 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo installing hole to end of arm
Hole Diameter: 3mm
Pitch:3x30

This thing is frequently bought with the above mentioned thing.



This is a optional Racers Edge Aluminum single arm servo horn, meant for usage with Futaba servos. This strong aluminum servo horn is similar in design to the Racers Edge Pro Adjustable servo horns, however includes a 3rd linkage installing point and does not use lock down screws.

This thing praises the above gone over thing.



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Perfect upgrade for radios discovered in RTR automobiles
Throttle and steering trim and reverse
Steering double rate dial
Throttle end point change
Channel 3 switch
Throttle fail safe
One year limited service warranty from Pastime Services beginning at date
    of purchase

INCLUDES:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Guideline
    Manual and On/Off Switch

NEEDS:
Servos of modeler's choice
4 AA batteries for transmitter

SPECIFICATIONS:
Transmitter:
Sending Frequency: 2.4GHz band
Power Requirement: 4 AA cells
Existing Drain: 100mA or less

    Receiver;
Dimensions: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shared with servo)
Battery Fail Safe Voltage: 3.8V*
Existing Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work effectively when other kind of battery is used

REMARKS:
2.4GHz FHSS is not suitable with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
kind of servos or peripherals.
High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts
    digital servos consisting of the BLS series and most peripheral
    equipment such as brushless ESCs