Savox Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a spending plan friendly waterproof digital servo with excellent torque for lots of applications. This brushed servo features a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge technology with extremely high 12-bit (4096) resolution and metal gears for your greater precision when evading puddles. This is a terrific upgrade if your planning to drive your RC automobile in any condition...rain, sleet, or snow.

Features:

• Integrates cutting edge
  technology with extremely high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Incredibly strong metal gears guarantee long-life and durability.
• Our servos are absolutely green ? from products to production, these servos are ecologically friendly.
• Ideal for RC vehicles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Equipment: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

This item is frequently gotten with the above discussed item.

Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Difficult anodized aluminum building and construction
Compression mount, 2 screws install on either side of arm and
    tighten center hole around servo spline

INCLUDES:
Axial 25T Aluminum Servo Horn
Two 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo mounting hole to end of arm
Hole Size: 3mm
Pitch:3x30

This item is frequently gotten with the above discussed item.



This is a optional Racers Edge Aluminum single arm servo horn, planned for usage with Futaba servos. This sturdy aluminum servo horn is comparable in design to the Racers Edge Pro Adjustable servo horns, however features a 3rd linkage mounting point and does not use lock down screws.

This item praises the above gone over item.



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Ideal upgrade for radios found in RTR vehicles
Throttle and guiding trim and reverse
Guiding dual rate dial
Throttle end point adjustment
Channel 3 switch
Throttle fail safe
One year limited warranty from Pastime Solutions starting at date
    of purchase

INCLUDES:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Direction
    Handbook and On/Off Switch

REQUIRES:
Servos of modeler's option
Four AA batteries for transmitter

SPECIFICATIONS:
Transmitter:
Transmitting Frequency: 2.4GHz band
Power Requirement: Four AA cells
Current Drain: 100mA or less

    Receiver;
Measurements: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shown servo)
Battery Fail Safe Voltage: 3.8V*
Current Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work properly when other kind of battery is utilized

REMARKS:
2.4GHz FHSS is not suitable with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
kind of servos or peripherals.
High-Speed mode (in 4PL tx just), with an output of 6.8ms accepts
    digital servos consisting of the BLS series and most peripheral
    equipment such as brushless ESCs