Savox Waterproof Micro Digital Servo 0.11Sec / 69Oz @ 6V

WATERPROOF DIGITAL MICRO SERVO .11/69@6V IDEAL FOR TRAXXAS 1/16

Lots of others have purchased this product in addition to the product that you are presently reviewing.



This 2-cell Lithium Polymer 2000mAh battery pack is the perfect size, shape and weight for lots of 1/16 and 1/18 scale automobiles and trucks, and the 50C discharge rate offers you the top-end power and efficiency you desire. It's also an excellent choice for mid-size parkflyer planes. 50C constant discharge rate of 100 amps. Comes with Traxxas adapters on the discharge leads.
Also offered with Deans or EC3 connectors!
Specifications

Length: 93 mm
Width: 31 mm
Height: 17 mm

Get this product to enhance the one you are reading about.

Steering Arm (Upper & Lower)/

This is the Steering Arm for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
Two Ball Studs
Front and Rear Shock Mounts
4 2.5x18mm Cap Head Screws

NEEDS:
Installation on the vehicle

This product is frequently purchased with the above stated product.

Hollow Balls, Steel (Machined)

    These are the Machined Steel Hollow Balls from Traxxas.

FEATURES:
Steel building and construction
Silver in color

INCLUDES:
Twenty Two Hollow Balls

SPECIFICATIONS:
Length: 5mm (0.20")
Outer Diameter: 4.5mm (0.18")
Inner Diameter: 2.5mm (0.1")

Lots of others have purchased this product in addition to the product that you are presently reviewing.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for use on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May also be utilized in any vehicle where this size bearing is needed

INCLUDES:
Two Ball Bearings

NEEDS:
Installation on the vehicle

SPECIFICATIONS:
Outer Diameter: 8mm (0.31")
Inner Diameter: 4mm (0.16")
Width: 3mm (0.12")

You will love this item if you have the item just above mentioned.

Gear Set (For 2080 Micro Water

This is the Servo Equipment Set for use on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FUNCTIONS:
Nylon building and construction
Grey in color

INCLUDES:
One Output Equipment
One Top Reduction Equipment
One Center Reduction Equipment
One Bottom Reduction Equipment
Instruction sheet

NEEDS:
Installation on the servo

Get this product to enhance the one you are reading about.



These are the optional Hot-Racing Long Aluminum Toe-Links
for the 1/16 scale Traxxas E-Revo, Tomb Digger and Summit vehicles.

FEATURES:
Aluminum building and construction, red in color
Brass pivot ball bushings
Changes Traxxas #7138 & 7138G stock plastic toe-links
Thirty day restricted service warranty beginning at date of purchase-valid
    in the United States only

INCLUDES:
Two Aluminum Links with one Open Ball End and one Ball Stud End
Two Aluminum Links with 2 Open Ball Ends

SPECIFICATIONS:
General Length: 3.33" (84.5mm)

The below product additionally sets actually well with the product being gone over.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

NEEDS:
Installation on the vehicle