Savox Waterproof Micro Digital Servo 0.11Sec / 69Oz @ 6V

WATERPROOF DIGITAL MICRO SERVO .11/69@6V SUITABLE FOR TRAXXAS 1/16

Several others have actually acquired this thing along with the thing that you are currently checking out.



This 2-cell Lithium Polymer 2000mAh battery pack is the ideal size, shape and weight for tons of 1/16 and 1/18 scale automobiles and trucks, and the 50C discharge rate offers you the top-end power and efficiency you want. It's also a great option for mid-size parkflyer aircrafts. 50C constant discharge rate of 100 amps. Comes with Traxxas ports on the discharge leads.
Also offered with Deans or EC3 connectors!
Specifications

Length: 93 mm
Width: 31 mm
Height: 17 mm

Get this thing to improve the one you read about.

Steering Arm (Upper & Lower)/

This is the Steering Arm for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
Two Ball Studs
Front and Rear Shock Installs
Four 2.5x18mm Cap Head Screws

NEEDS:
Setup on the vehicle

This thing is frequently acquired with the above stated thing.

Hollow Balls, Steel (Machined)

    These are the Machined Steel Hollow Balls from Traxxas.

FEATURES:
Steel construction
Silver in color

INCLUDES:
Twenty Two Hollow Balls

SPECS:
Length: 5mm (0.20")
Outer Diameter: 4.5mm (0.18")
Inner Diameter: 2.5mm (0.1")

Several others have actually acquired this thing along with the thing that you are currently checking out.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for use on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May also be utilized in any vehicle where this size bearing is required

INCLUDES:
Two Ball Bearings

NEEDS:
Setup on the vehicle

SPECS:
Outer Diameter: 8mm (0.31")
Inner Diameter: 4mm (0.16")
Width: 3mm (0.12")

You will certainly love this product if you have the product previously stated.

Gear Set (For 2080 Micro Water

This is the Servo Equipment Set for use on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FUNCTIONS:
Nylon construction
Grey in color

INCLUDES:
One Output Equipment
One Leading Decrease Equipment
One Center Decrease Equipment
One Bottom Decrease Equipment
Direction sheet

NEEDS:
Setup on the servo

Get this thing to improve the one you read about.



These are the optional Hot-Racing Long Aluminum Toe-Links
for the 1/16 scale Traxxas E-Revo, Grave Digger and Top vehicles.

FEATURES:
Aluminum construction, red in color
Brass pivot ball bushings
Changes Traxxas #7138 & 7138G stock plastic toe-links
Thirty day minimal service warranty beginning at date of purchase-valid
    in the United States just

INCLUDES:
Two Aluminum Links with one Open Ball End and one Ball Stud End
Two Aluminum Links with two Open Ball Ends

SPECS:
Overall Length: 3.33" (84.5mm)

The listed below thing additionally sets truly well with the thing being reviewed.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

NEEDS:
Setup on the vehicle