Savox Waterproof Micro Digital Servo 0.11Sec / 69Oz @ 6V

WATERPROOF DIGITAL MICRO SERVO .11/69@6V IDEAL FOR TRAXXAS 1/16

Many others have acquired this thing together with the thing that you are presently checking out.



This 2-cell Lithium Polymer 2000mAh battery pack is the perfect size, shape and weight for lots of 1/16 and 1/18 scale automobiles and trucks, and the 50C discharge rate provides you the top-end power and performance you prefer. It's also a terrific choice for mid-size parkflyer airplanes. 50C constant discharge rate of 100 amps. Includes Traxxas ports on the discharge leads.
Also offered with Deans or EC3 connectors!
Specifications

Length: 93 mm
Width: 31 mm
Height: 17 mm

Get this thing to improve the one you read around.

Steering Arm (Upper & Lower)/

This is the Steering Arm for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
2 Ball Studs
Front and Rear Shock Mounts
4 2.5x18mm Cap Head Screws

NEEDS:
Installation on the vehicle

This thing is often acquired with the above discussed thing.

Hollow Balls, Steel (Machined)

    These are the Machined Steel Hollow Balls from Traxxas.

FEATURES:
Steel construction
Silver in color

INCLUDES:
Twenty 2 Hollow Balls

SPECS:
Length: 5mm (0.20")
Outer Size: 4.5mm (0.18")
Inner Size: 2.5mm (0.1")

Many others have acquired this thing together with the thing that you are presently checking out.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for use on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May also be utilized in any vehicle where this size bearing is required

INCLUDES:
2 Ball Bearings

NEEDS:
Installation on the vehicle

SPECS:
Outer Size: 8mm (0.31")
Inner Size: 4mm (0.16")
Width: 3mm (0.12")

You will love this product if you have the product earlier discussed.

Gear Set (For 2080 Micro Water

This is the Servo Gear Set for use on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FUNCTIONS:
Nylon construction
Grey in color

INCLUDES:
One Output Gear
One Top Reduction Gear
One Center Reduction Gear
One Bottom Reduction Gear
Instruction sheet

NEEDS:
Installation on the servo

Get this thing to improve the one you read around.



These are the optional Hot-Racing Long Aluminum Toe-Links
for the 1/16 scale Traxxas E-Revo, Grave Digger and Summit vehicles.

FEATURES:
Aluminum construction, red in color
Brass pivot ball bushings
Replaces Traxxas #7138 & 7138G stock plastic toe-links
Thirty day minimal service warranty starting at date of purchase-valid
    in the United States only

INCLUDES:
2 Aluminum Hyperlinks with one Open Ball End and one Ball Stud End
2 Aluminum Hyperlinks with two Open Ball Ends

SPECS:
Total Length: 3.33" (84.5mm)

The below thing likewise pairs actually well with the thing being talked about.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

NEEDS:
Installation on the vehicle