Savox Waterproof Micro Digital Servo 0.11Sec / 69Oz @ 6V

WATERPROOF DIGITAL MICRO SERVO .11/69@6V SUITABLE FOR TRAXXAS 1/16

Several others have actually gotten this thing along with the thing that you are presently reviewing.



This 2-cell Lithium Polymer 2000mAh battery pack is the perfect size, shape and weight for tons of 1/16 and 1/18 scale vehicles and trucks, and the 50C discharge rate offers you the top-end power and efficiency you prefer. It's also a terrific option for mid-size parkflyer airplanes. 50C continuous discharge rate of 100 amps. Has Traxxas adapters on the discharge leads.
Also available with Deans or EC3 connectors!
Specifications

Length: 93 mm
Width: 31 mm
Height: 17 mm

Get this thing to enhance the one you read around.

Steering Arm (Upper & Lower)/

This is the Steering Arm for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
2 Ball Studs
Front and Rear Shock Mounts
4 2.5x18mm Cap Head Screws

NEEDS:
Installation on the car

This thing is frequently gotten with the above pointed out thing.

Hollow Balls, Steel (Machined)

    These are the Machined Steel Hollow Balls from Traxxas.

FEATURES:
Steel building and construction
Silver in color

INCLUDES:
Twenty 2 Hollow Balls

SPECIFICATIONS:
Length: 5mm (0.20")
Outer Size: 4.5mm (0.18")
Inner Size: 2.5mm (0.1")

Several others have actually gotten this thing along with the thing that you are presently reviewing.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for use on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May also be used in any car where this size bearing is needed

INCLUDES:
2 Ball Bearings

NEEDS:
Installation on the car

SPECIFICATIONS:
Outer Size: 8mm (0.31")
Inner Size: 4mm (0.16")
Width: 3mm (0.12")

You will enjoy this item if you have the item above mentioned.

Gear Set (For 2080 Micro Water

This is the Servo Equipment Set for use on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FEATURES:
Nylon building and construction
Grey in color

INCLUDES:
One Output Equipment
One Top Decrease Equipment
One Center Decrease Equipment
One Bottom Decrease Equipment
Instruction sheet

NEEDS:
Installation on the servo

Get this thing to enhance the one you read around.



These are the optional Hot-Racing Long Aluminum Toe-Links
for the 1/16 scale Traxxas E-Revo, Tomb Digger and Top vehicles.

FEATURES:
Aluminum building and construction, red in color
Brass pivot ball bushings
Changes Traxxas #7138 & 7138G stock plastic toe-links
Thirty day limited warranty starting at date of purchase-valid
    in the United States just

INCLUDES:
2 Aluminum Links with one Open Ball End and one Ball Stud End
2 Aluminum Links with 2 Open Ball Ends

SPECIFICATIONS:
Overall Length: 3.33" (84.5mm)

The below thing also sets actually well with the thing being reviewed.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

NEEDS:
Installation on the car