Savox Waterproof Micro Digital Servo 0.11Sec / 69Oz @ 6V

WATERPROOF DIGITAL MICRO SERVO .11/69@6V PERFECT FOR TRAXXAS 1/16

Lots of others have actually purchased this item together with the item that you are currently reading about.



This 2-cell Lithium Polymer 2000mAh battery pack is the perfect size, shape and weight for lots of 1/16 and 1/18 scale automobiles and trucks, and the 50C discharge rate gives you the top-end power and performance you desire. It's also a great choice for mid-size parkflyer aircrafts. 50C constant discharge rate of 100 amps. Has Traxxas ports on the discharge leads.
Also readily available with Deans or EC3 connectors!
Specifications

Length: 93 mm
Width: 31 mm
Height: 17 mm

Get this item to boost the one you read about.

Steering Arm (Upper & Lower)/

This is the Steering Arm for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
2 Ball Studs
Front and Rear Shock Mounts
4 2.5x18mm Cap Head Screws

REQUIRES:
Setup on the automobile

This item is frequently purchased with the above stated item.

Hollow Balls, Steel (Machined)

    These are the Machined Steel Hollow Balls from Traxxas.

FEATURES:
Steel construction
Silver in color

CONSISTS OF:
Twenty 2 Hollow Balls

SPECIFICATIONS:
Length: 5mm (0.20")
Outer Size: 4.5mm (0.18")
Inner Size: 2.5mm (0.1")

Lots of others have actually purchased this item together with the item that you are currently reading about.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May also be utilized in any automobile where this size bearing is required

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Outer Size: 8mm (0.31")
Inner Size: 4mm (0.16")
Width: 3mm (0.12")

You will love this thing if you have the thing previously pointed out.

Gear Set (For 2080 Micro Water

This is the Servo Equipment Set for usage on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FUNCTIONS:
Nylon construction
Grey in color

CONSISTS OF:
One Output Equipment
One Leading Reduction Equipment
One Center Reduction Equipment
One Bottom Reduction Equipment
Direction sheet

REQUIRES:
Setup on the servo

Get this item to boost the one you read about.



These are the optional Hot-Racing Long Aluminum Toe-Links
for the 1/16 scale Traxxas E-Revo, Grave Digger and Top vehicles.

FEATURES:
Aluminum construction, red in color
Brass pivot ball bushings
Changes Traxxas #7138 & 7138G stock plastic toe-links
Thirty day restricted warranty starting at date of purchase-valid
    in the United States only

CONSISTS OF:
2 Aluminum Links with one Open Ball End and one Ball Stud End
2 Aluminum Links with 2 Open Ball Ends

SPECIFICATIONS:
General Length: 3.33" (84.5mm)

The below item also sets actually well with the item being gone over.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Posts for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

REQUIRES:
Setup on the automobile