Savox Waterproof Micro Digital Servo 0.11Sec / 69Oz @ 6V

WATERPROOF DIGITAL MICRO SERVO .11/69@6V IDEAL FOR TRAXXAS 1/16

Many others have gotten this thing together with the thing that you are currently reading about.



This 2-cell Lithium Polymer 2000mAh battery pack is the perfect size, shape and weight for tons of 1/16 and 1/18 scale cars and trucks, and the 50C discharge rate gives you the top-end power and performance you want. It's likewise a fantastic option for mid-size parkflyer planes. 50C continuous discharge rate of 100 amps. Comes with Traxxas adapters on the discharge leads.
Also offered with Deans or EC3 connectors!
Specifications

Length: 93 mm
Width: 31 mm
Height: 17 mm

Get this thing to boost the one you read about.

Steering Arm (Upper & Lower)/

This is the Steering Arm for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
Two Ball Studs
Front and Rear Shock Installs
Four 2.5x18mm Cap Head Screws

REQUIRES:
Installation on the vehicle

This thing is often gotten with the above mentioned thing.

Hollow Balls, Steel (Machined)

    These are the Machined Steel Hollow Balls from Traxxas.

FEATURES:
Steel building and construction
Silver in color

CONSISTS OF:
Twenty Two Hollow Balls

SPECS:
Length: 5mm (0.20")
Outer Size: 4.5mm (0.18")
Inner Size: 2.5mm (0.1")

Many others have gotten this thing together with the thing that you are currently reading about.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May likewise be utilized in any vehicle where this size bearing is required

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Installation on the vehicle

SPECS:
Outer Size: 8mm (0.31")
Inner Size: 4mm (0.16")
Width: 3mm (0.12")

You will like this thing if you have the thing previously stated.

Gear Set (For 2080 Micro Water

This is the Servo Gear Set for usage on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FEATURES:
Nylon building and construction
Grey in color

CONSISTS OF:
One Output Gear
One Leading Decrease Gear
One Center Decrease Gear
One Bottom Decrease Gear
Direction sheet

REQUIRES:
Installation on the servo

Get this thing to boost the one you read about.



These are the optional Hot-Racing Long Aluminum Toe-Links
for the 1/16 scale Traxxas E-Revo, Tomb Digger and Top vehicles.

FEATURES:
Aluminum building and construction, red in color
Brass pivot ball bushings
Replaces Traxxas #7138 & 7138G stock plastic toe-links
Thirty day restricted service warranty beginning at date of purchase-valid
    in the United States only

CONSISTS OF:
Two Aluminum Hyperlinks with one Open Ball End and one Ball Stud End
Two Aluminum Hyperlinks with 2 Open Ball Ends

SPECS:
General Length: 3.33" (84.5mm)

The below thing likewise pairs actually well with the thing being discussed.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Posts for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

REQUIRES:
Installation on the vehicle