RPM Traxxas Revo, T-Maxx 2.5R / 3.3 & E-Maxx 16.8 Axle Carriers & Ov

This is a set of optional RPM Axle Carriers/Steering Blocks
for the Traxxas Revo.
These will also work on the T/E Maxx 2.5R and 3.3 versions.

FEATURES:
Constructed of molded composite material, blue in color
Wall density around the pillow-balls has been increased by 40%
    removing split walls
Over 20% more material supports the pillow-balls, avoiding them
    from pulling through
Upgraded enhancing rib supporting tie rod mount
Upgraded boot lock tabs for simpler elimination of the silicone boots
Press-fit bearings in the provider for lowered axle motion
Two-piece pillow-ball set screws utilize aluminum and Delrin for the
    ultimate in holding power under extreme circumstances

INCLUDES:
2 Axle Carriers/Steering Blocks
2 12x21x5mm Inner Bearings
2 6x15x5mm Outer Bearings
Four Aluminum Set Screws
Four Delrin Bushing Caps
Direction Sheet

NEEDS:
Setting up on axles, no adjustments needed

REMARKS:
Replacement Bearing Set, RPMC8570
Replacement Pillow-Ball Set Screws, RPMC0800

Do not utilize the Traxxas #5356 Long Travel Rocker Arm Set with these
    Axle Carriers. Doing so will void the RPM guarantee.

This thing praises the above talked about thing.

A-Arms, For Maxx, 2.5R & 3.3, Blue

These are the RPM Blue A-Arms for all variations of the Traxxas T-Maxx.
Optional Arms that change the stock.

FEATURES:
Blue in color
Plastic construction

INCLUDES:
(1) Upper Arm
(1) Lower Arm
(2) RPM Decals

NEEDS:
Installation, NOTE-four plans are needed to change all A-arms

SPECS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Density: 0.33" (8.4mm)