RPM Toe-In Gauge

By making it possible to set the toe in properly and consistantly, RPM's
toe in gauge permits the racer to obtain more foreseeable steering. The toe in
guage is formed from black plastic, and will deal with all 1/10 scale automobiles and
trucks (using included standoffs).

Includes: 1 toe in gauge
2 truck standoffs
Total instructions

pcd 5/8/94

This thing is often acquired with the above discussed thing.



This is the DuraTrax Pit Tech Camber Gauge.

FEATURES:
Easily and properly determines camber settings in 1° increments from
    10° favorable to 10° unfavorable
Perfect for on-road and off-road automobiles and trucks
Thumb wheel locks determine settings firmly for precise adjusments
Includes ideas for setting the camber to achieve optimal cornering
    performance on any kind of track design or surface area
Constructed of black plastic

CONSISTS OF:
One DuraTrax Pit Tech Camber Gauge

NEEDS:
Changing gauge to desired setting, putting gauge versus wheel or
    tire and adjusting camber linkages till wheel is lined up with the
    gauge at the top and bottom

REMARKS:
Typical off-road buggy and truck settings:
    Front: 1-3° unfavorable
    Rear: 0-1° unfavorable
Note: Unfavorable camber prevents the externally edge of the tire from
    rolling under throughout cornering. However, excessive unfavorable camber
    will cause loss of traction under straight-line acceleration

This is a fantastic addition to the thing presently being reviewed.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel centers fit on completion of the stub axles.

FEATURES:
Changes missing out on or harmed hex wheel centers
Hubs are made of molded black plastic
Axle pins are steel

CONSISTS OF:
Two Hex Wheel Hubs
Two 2.5x12mm axle pins

NEEDS:
Placing pins through stub axles (4953) and putting wheel centers in
    recessed location of axle providers (4932).