RPM Toe-In Gauge

By making it possible to set the toe in accurately and consistantly, RPM's
toe in gauge enables the racer to obtain more predictable steering. The toe in
guage is molded from black plastic, and will deal with all 1/10 scale cars and
trucks (utilizing consisted of standoffs).

Includes: 1 toe in gauge
2 truck standoffs
Total guidelines

pcd 5/8/94

This item is frequently gotten with the above mentioned item.



This is the DuraTrax Pit Tech Camber Gauge.

FEATURES:
Easily and accurately measures camber settings in 1° increments from
    10° favorable to 10° unfavorable
Perfect for on-road and off-road cars and trucks
Thumb wheel locks assess settings safely for accurate adjusments
Includes suggestions for setting the camber to attain optimal cornering
    performance on any kind of track design or surface area
Constructed of black plastic

CONSISTS OF:
One DuraTrax Pit Tech Camber Gauge

REQUIRES:
Adjusting gauge to preferred setting, positioning gauge versus wheel or
    tire and changing camber linkages till wheel is lined up with the
    gauge on top and bottom

COMMENTS:
Typical off-road buggy and truck settings:
    Front: 1-3° unfavorable
    Rear: 0-1° unfavorable
Keep in mind: Negative camber prevents the outside edge of the tire from
    rolling under throughout cornering. However, excessive unfavorable camber
    will cause loss of traction under straight-line velocity

This is a superb enhancement to the item presently being talked about.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on the end of the stub axles.

FEATURES:
Changes missing or damaged hex wheel hubs
Centers are made from molded black plastic
Axle pins are steel

CONSISTS OF:
Two Hex Wheel Centers
Two 2.5x12mm axle pins

REQUIRES:
Placing pins through stub axles (4953) and positioning wheel hubs in
    recessed location of axle carriers (4932).