RPM Toe-In Gauge

By making it possible to set the toe in precisely and consistantly, RPM's
toe in gauge enables the racer to get more foreseeable steering. The toe in
guage is formed from black plastic, and will work on all 1/10 scale vehicles and
trucks (utilizing included standoffs).

Includes: 1 toe in gauge
2 truck standoffs
Complete instructions

pcd 5/8/94

This product is often purchased with the above stated product.



This is the DuraTrax Pit Tech Camber Gauge.

FEATURES:
Easily and precisely determines camber settings in 1° increments from
    10° favorable to 10° unfavorable
Suitable for on-road and off-road vehicles and trucks
Thumb wheel locks evaluate settings firmly for exact adjusments
Includes suggestions for setting the camber to achieve maximum cornering
    efficiency on any kind of track design or surface
Constructed of black plastic

CONSISTS OF:
One DuraTrax Pit Tech Camber Gauge

REQUIRES:
Adjusting gauge to preferred setting, positioning gauge versus wheel or
    tire and changing camber linkages up until wheel is aligned with the
    gauge at the top and bottom

REMARKS:
Common off-road buggy and truck settings:
    Front: 1-3° unfavorable
    Back: 0-1° unfavorable
Keep in mind: Negative camber prevents the outdoors edge of the tire from
    rolling under during cornering. However, too much unfavorable camber
    will cause loss of traction under straight-line acceleration

This is a amazing enhancement to the product presently being talked about.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on completion of the stub axles.

FEATURES:
Changes missing or harmed hex wheel hubs
Centers are made from molded black plastic
Axle pins are steel

CONSISTS OF:
2 Hex Wheel Centers
2 2.5x12mm axle pins

REQUIRES:
Inserting pins through stub axles (4953) and positioning wheel hubs in
    recessed area of axle carriers (4932).