RPM Toe-In Gauge

By making it possible to set the toe in precisely and consistantly, RPM's
toe in gauge permits the racer to obtain more foreseeable steering. The toe in
guage is molded from black plastic, and will deal with all 1/10 scale cars and
trucks (utilizing consisted of standoffs).

Includes: 1 toe in gauge
2 truck standoffs
Total instructions

pcd 5/8/94

This item is regularly acquired with the above stated item.



This is the DuraTrax Pit Tech Camber Gauge.

FEATURES:
Quickly and precisely determines camber settings in 1° increments from
    10° favorable to 10° negative
Suitable for on-road and off-road cars and trucks
Thumb wheel locks determine settings firmly for precise adjusments
Includes suggestions for setting the camber to accomplish optimal cornering
    performance on any type of track design or surface
Constructed of black plastic

CONSISTS OF:
One DuraTrax Pit Tech Camber Gauge

NEEDS:
Adjusting gauge to preferred setting, putting gauge versus wheel or
    tire and changing camber linkages until wheel is aligned with the
    gauge on top and bottom

COMMENTS:
Common off-road buggy and truck settings:
    Front: 1-3° negative
    Back: 0-1° negative
Keep in mind: Unfavorable camber prevents the externally edge of the tire from
    rolling under throughout cornering. However, too much negative camber
    will trigger loss of traction under straight-line velocity

This is a great addition to the item currently being discussed.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on the end of the stub axles.

FEATURES:
Changes missing out on or harmed hex wheel hubs
Hubs are made of molded black plastic
Axle pins are steel

CONSISTS OF:
Two Hex Wheel Hubs
Two 2.5x12mm axle pins

NEEDS:
Placing pins through stub axles (4953) and putting wheel hubs in
    recessed area of axle carriers (4932).