RPM Toe-In Gauge

By making it possible to set the toe in accurately and consistantly, RPM's
toe in gauge allows the racer to get more predictable steering. The toe in
guage is formed from black plastic, and will work on all 1/10 scale cars and
trucks (utilizing consisted of standoffs).

Consists of: 1 toe in gauge
2 truck standoffs
Total guidelines

pcd 5/8/94

This item is often gotten with the above pointed out item.



This is the DuraTrax Pit Tech Camber Gauge.

FEATURES:
Quickly and accurately determines camber settings in 1° increments from
    10° positive to 10° unfavorable
Ideal for on-road and off-road cars and trucks
Thumb wheel locks gauge settings firmly for accurate adjusments
Consists of pointers for setting the camber to attain maximum cornering
    efficiency on any kind of track design or surface
Constructed of black plastic

INCLUDES:
One DuraTrax Pit Tech Camber Gauge

REQUIRES:
Adjusting gauge to desired setting, positioning gauge versus wheel or
    tire and adjusting camber linkages till wheel is aligned with the
    gauge at the top and bottom

REMARKS:
Typical off-road buggy and truck settings:
    Front: 1-3° unfavorable
    Back: 0-1° unfavorable
Keep in mind: Negative camber prevents the outside edge of the tire from
    rolling under throughout cornering. However, excessive unfavorable camber
    will cause loss of traction under straight-line acceleration

This is a fantastic enhancement to the item presently being discussed.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel centers fit on completion of the stub axles.

FEATURES:
Replaces missing or harmed hex wheel centers
Hubs are made from molded black plastic
Axle pins are steel

INCLUDES:
Two Hex Wheel Hubs
Two 2.5x12mm axle pins

REQUIRES:
Placing pins through stub axles (4953) and positioning wheel centers in
    recessed area of axle carriers (4932).