RPM Sealed Gear Cover, For Traxxas E-Rustler/Stampede 2Wd/Bandit/Sla

This is the optional RPM Gear Cover for the Traxxas Electric Rustler,
Stampede, Outlaw, and Slash.

FEATURES:
Nylon construction
Blue in color
Fits XL-5 and VXL Versions
Maximum Spur Gear (87 Tooth)

CONSISTS OF:
One Blue Sealed Gear Cover

REQUIRES:
Installation on the above pointed out cars

SPECS:
Length: 79mm (3.11")
Width: 60mm (2.36")
Height: 35mm (1.38")

REMARKS:
Also readily available in Black (RPMC8029)

This item praises the above talked about item.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel construction
Natural sleek color

CONSISTS OF:
Twelve Body Clips

SPECS:
Length: 26mm

Want another excellent item to enhance the above stated item?

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

This item praises the main item below.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Tough nylon reinforced plastic construction
Uses all stock hardware (for mounting shocks etc.)

CONSISTS OF:
One back shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm

Want another excellent item to enhance the above stated item?

Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Back Bumper Mount from RPM for use on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon construction
Blue in color

CONSISTS OF:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
3 3x25mm Screws
One 3mm Locknut
2 RPM Decals

REQUIRES:
Installation on the vehicle
2mm Allen Motorist for Installation

Frequently acquired with the item that you are currently reading about.

Rear Bumper, For Traxxas Slash 2Wd, Blue

This is the RPM Back Bumper for use on the Traxxas Slash.

FEATURES:
Nylon construction
Blue in color

CONSISTS OF:
One Left Side Bumper Support
One Right Side Bumper Support
One Rear Bumper
Eight 3x16mm Buttonhead Screws

REQUIRES:
Installation on the vehicle

REMARKS:
Also readily available in:
Black (RPMC0080)
Chrome (RPMC0081)

This is a fantastic enhancement to the item currently being talked about.

Blue Gearbox Housing And Rear Mounts For Traxxas 2Wd Vehicles

This is the optional RPM Hybrid Gearbox Real estate in Blue
for the Traxxas 1/10 scale 2WD Slash, Stampede, E-Rustler and Bandit.

FEATURES:
0.12" (3mm) thick 6061 T6 aluminum motor plate provides strength to
    lock in gear mesh, and much better heat dissipation than stock plastic
    motor plate
Motor plate is separate from rear bumper installs getting rid of damage to
    the plate in the event of a rear collision
Formed nylon gearbox real estate with stock bumper mounting holes
Different real estate and rear installs enable transmission maintenance
    without impacting suspension settings
0° and 3° molded rear installs offer tighter tolerances and less slop
    than machined elements for much better camber and toe angle retention

CONSISTS OF:
2 Gearbox Housings, Motor Plate, 2 0° and 2 3° Back Mounts and
    Instructions