RPM 2.2 Revolver Wheels, For Traxxas Rustler/Stampede (Front), Black

These are the Front Revolver 2.2" Wheels from RPM for usage on the
Traxxas Electric Rustler and Stampede.

FEATURES:
Plastic building and construction
Black in color
10-hole design

INCLUDES:
2 Front Revolver 2.2" Wheels

NEEDS:
Tires
Installation on the automobile

SPECS:
Width: 55mm (2.2")
Size: 62mm (2.4")
Hex: 12mm

The listed below thing likewise pairs really well with the thing being reviewed.



This is a set of Sand Paw 2.0 2.2" Sand Truck Rear Tires from Pro-Line.

FEATURES:
Fits conventional 2.2" truck tires
Split paddles for fantastic traction in sand or snow

INCLUDES:
2 Sand Paw 2.0 2.2" Sand Truck Rear Tires with Foam Inserts

NEEDS:
2.2" truck wheels
Tire Glue DTXR2000, DTXR2002

SPECS:
Width: 2.0" (51mm)
Inner Size: 2.2" (56mm)

Frequently acquired with the thing that you are currently reading about.



This is a set of PRO-LINE M2 compound GLADIATOR tires for any popular
brand (ASSOCIATED, LOSI, HPI,AND SO ON) 2.2" truck rim.

FEATURES:
Soft, sticky, M2 compound multi-surface tire tread for traction on
most hard to grip surface areas. Square surges

INCLUDES:
2 GLADIATOR tread tires.
Two white foam liner/inserts.
One black PRO-LINE logo decal

NEEDS:
Tire must be fixed onto the rim with glue such as DTXR2000

SPECS:
Tires inner diameter is 2.2" with an external diameter of 4" by 2" wide

Right here is a wonderful thing that numerous others have actually purchased the exact same time.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for usage in much heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB shows capability through Castle Link USB adapter (not included,
    order CSEM6300)
Water resistant for usage in almost every environment (not planned for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces many stock brushed motors
Four magnet, four pole rotor for higher torque
1.4" diameter slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Change, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's choice

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)