RPM 2.2 Revolver Wheels, For Traxxas Rustler/Stampede (Front), Black

These are the Front Revolver 2.2" Wheels from RPM for usage on the
Traxxas Electric Rustler and Stampede.

FEATURES:
Plastic construction
Black in color
10-hole design

INCLUDES:
2 Front Revolver 2.2" Wheels

NEEDS:
Tires
Setup on the car

SPECIFICATIONS:
Width: 55mm (2.2")
Size: 62mm (2.4")
Hex: 12mm

The listed below item additionally pairs really well with the item being reviewed.



This is a set of Sand Paw 2.0 2.2" Sand Truck Rear Tires from Pro-Line.

FEATURES:
Fits standard 2.2" truck tires
Split paddles for great traction in sand or snow

INCLUDES:
2 Sand Paw 2.0 2.2" Sand Truck Rear Tires with Foam Inserts

NEEDS:
2.2" truck wheels
Tire Glue DTXR2000, DTXR2002

SPECIFICATIONS:
Width: 2.0" (51mm)
Inner Size: 2.2" (56mm)

Frequently acquired with the item that you are presently reading about.



This is a set of PRO-LINE M2 compound GLADIATOR tires for any popular
brand name (ASSOCIATED, LOSI, HPI,ETC.) 2.2" truck rim.

FEATURES:
Soft, sticky, M2 compound multi-surface tire tread for traction on
most tough to grip surfaces. Square increases

INCLUDES:
2 GLADIATOR tread tires.
Two white foam liner/inserts.
One black PRO-LINE logo design decal

NEEDS:
Tire must be fixed onto the rim with glue such as DTXR2000

SPECIFICATIONS:
Tires inner size is 2.2" with an outer size of 4" by 2" broad

Below is a terrific item that numerous others have actually bought at the very same time.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for usage in heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB shows ability through Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for usage in nearly every environment (not intended for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces lots of stock brushed motors
4 magnet, 4 pole rotor for greater torque
1.4" size slotted stator
Easily removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Switch, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's choice

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)