RPM 2.2 Revolver Wheels, For Traxxas Rustler/Stampede (Front), Black

These are the Front Revolver 2.2" Wheels from RPM for use on the
Traxxas Electric Rustler and Stampede.

FEATURES:
Plastic building
Black in color
10-hole design

INCLUDES:
2 Front Revolver 2.2" Wheels

NEEDS:
Tires
Installation on the automobile

SPECS:
Width: 55mm (2.2")
Diameter: 62mm (2.4")
Hex: 12mm

The below product additionally pairs actually well with the product being gone over.



This is a pair of Sand Paw 2.0 2.2" Sand Truck Rear Tires from Pro-Line.

FUNCTIONS:
Fits basic 2.2" truck tires
Split paddles for great traction in sand or snow

INCLUDES:
2 Sand Paw 2.0 2.2" Sand Truck Rear Tires with Foam Inserts

NEEDS:
2.2" truck wheels
Tire Glue DTXR2000, DTXR2002

SPECS:
Width: 2.0" (51mm)
Inner Diameter: 2.2" (56mm)

Frequently gotten with the product that you are currently reviewing.



This is a pair of PRO-LINE M2 compound GLADIATOR tires for any popular
brand (ASSOCIATED, LOSI, HPI,AND SO ON) 2.2" truck rim.

FEATURES:
Soft, sticky, M2 compound multi-surface tire tread for traction on
most tough to grip surfaces. Square spikes

INCLUDES:
2 GLADIATOR tread tires.
Two white foam liner/inserts.
One black PRO-LINE logo design decal

NEEDS:
Tire should be repaired onto the rim with glue such as DTXR2000

SPECS:
Tires inner size is 2.2" with an external size of 4" by 2" broad

Below is a wonderful product that numerous others have actually bought at the exact same time.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in much heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB shows capability by means of Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for use in nearly every environment (not planned for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces lots of stock brushed motors
Four magnet, 4 pole rotor for greater torque
1.4" size slotted stator
Easily removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Change, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery adapter of modeler's option

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)