RPM Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Rear Bumper Mount from RPM for usage on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building
Blue in color

INCLUDES:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
4 3x12mm Screws
One 3x16mm Screw
Three 3x25mm Screws
One 3mm Locknut
2|2} RPM Decals

NEEDS:
Installation on the vehicle
2mm Allen Motorist for Installation

Get this item to boost the one you are reading about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FUNCTIONS:
Sturdy nylon strengthened plastic building
Utilizes all stock hardware (for installing shocks and so on)

INCLUDES:
One back shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm

Below is a great item that lots of others have purchased the exact same time.

Rear Bumper, For Traxxas Slash 2Wd, Blue

This is the RPM Rear Bumper for usage on the Traxxas Slash.

FEATURES:
Nylon building
Blue in color

INCLUDES:
One Left Side Bumper Support
One Right Side Bumper Support
One Rear Bumper
8 3x16mm Buttonhead Screws

NEEDS:
Installation on the vehicle

REMARKS:
Also readily available in:
Black (RPMC0080)
Chrome (RPMC0081)

This item compliments the above discussed item.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Vehicle and Safeguards the Chassis.

FEATURES:
Resilient Plastic Building and construction
Black in Color

INCLUDES:
One Bumper
One Group RPM Decal

NEEDS:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This item compliments the above discussed item.



This is the ST Racing Solidified Sleek Steel Lock-nut Design Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins backing out of the A-arms? If you've
been running your Traxxas vehicle enough time, you more than likely have
currently experienced this issue. ST Racing Concepts Heat Treated
Sleek Steel Lock-Nut Design Hinge-Pin Kit will resolve this issue
at last. CNC Machined from premium 12.9 grade carbon
steel, that is then heat dealt with for boost in toughness, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

This item is regularly bought with the above pointed out item.

Blue Gearbox Housing And Rear Mounts For Traxxas 2Wd Vehicles

This is the optional RPM Hybrid Gearbox Real estate in Blue
for the Traxxas 1/10 scale 2WD Slash, Stampede, E-Rustler and Bandit.

FEATURES:
0.12" (3mm) thick 6061 T6 aluminum motor plate provides strength to
    lock in gear mesh, and better heat dissipation than stock plastic
    motor plate
Motor plate is separate from rear bumper installs removing damage to
    the plate in the event of a rear crash
Formed nylon gearbox real estate with stock bumper installing holes
Different real estate and rear installs enable transmission maintenance
    without affecting suspension settings
0° and 3° molded rear installs offer tighter tolerances and less slop
    than machined components for better camber and toe angle retention

INCLUDES:
Two Gearbox Housings, Motor Plate, two 0° and two 3° Rear Mounts and
    Directions