RPM Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Rear Bumper Mount from RPM for usage on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building and construction
Blue in color

INCLUDES:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
4 3x12mm Screws
One 3x16mm Screw
Three 3x25mm Screws
One 3mm Locknut
Two RPM Decals

NEEDS:
Installation on the vehicle
2mm Allen Motorist for Installation

Get this product to improve the one you read about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Tough nylon reinforced plastic building and construction
Utilizes all stock hardware (for installing shocks and so on)

INCLUDES:
One rear shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm

Here is a terrific product that numerous others have bought at the same time.

Rear Bumper, For Traxxas Slash 2Wd, Blue

This is the RPM Rear Bumper for usage on the Traxxas Slash.

FEATURES:
Nylon building and construction
Blue in color

INCLUDES:
One Left Side Bumper Support
One Right Side Bumper Support
One Rear Bumper
Eight 3x16mm Buttonhead Screws

NEEDS:
Installation on the vehicle

COMMENTS:
Likewise available in:
Black (RPMC0080)
Chrome (RPMC0081)

This product compliments the above talked about product.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Car and Safeguards the Chassis.

FEATURES:
Resilient Plastic Building
Black in Color

INCLUDES:
One Bumper
One Team RPM Decal

NEEDS:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

COMMENTS:
The Factory Number is #81162

This product compliments the above talked about product.



This is the ST Racing Hardened Refined Steel Lock-nut Design Hinge-pin Set
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins backing out of the A-arms? If you've
been running your Traxxas vehicle enough time, you more than likely have
currently experienced this issue. ST Racing Concepts Heat Treated
Refined Steel Lock-Nut Design Hinge-Pin Set will solve this issue
once and for all. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat dealt with for boost in sturdiness, then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts

This product is frequently purchased with the above discussed product.

Blue Gearbox Housing And Rear Mounts For Traxxas 2Wd Vehicles

This is the optional RPM Hybrid Gearbox Housing in Blue
for the Traxxas 1/10 scale 2WD Slash, Stampede, E-Rustler and Bandit.

FEATURES:
0.12" (3mm) thick 6061 T6 aluminum motor plate provides strength to
    lock in gear mesh, and better heat dissipation than stock plastic
    motor plate
Motor plate is different from rear bumper installs removing damage to
    the plate in case of a rear collision
Formed nylon gearbox real estate with stock bumper installing holes
Separate real estate and rear installs enable transmission upkeep
    without affecting suspension settings
0° and 3° molded rear installs offer tighter tolerances and less slop
    than machined components for better camber and toe angle retention

INCLUDES:
Two Gearbox Housings, Motor Plate, 2 0° and 2 3° Rear Mounts and
    Instructions