RPM Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Black

This is the optional Back Bumper Mount from RPM for usage on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
3 3x25mm Screws
One 3mm Locknut
Two RPM Decals

REQUIRES:
Setup on the vehicle
2mm Allen Motorist for Setup

The below thing additionally sets really well with the thing being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Below is an additional thing that compliments the thing being talked about.

Rear Bumper, For Traxxas Slash 2Wd, Black

This is the optional RPM Back Bumper for usage on the Traxxas Slash.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Left Side Bumper Support
One Right Side Bumper Support
One Rear Bumper
8 3x16mm Buttonhead Screws

REQUIRES:
Setup on the vehicle

REMARKS:
Likewise readily available in:
Blue (RPMC0082)
Chrome (RPMC0081)

Below is a great thing that many others have bought at the very same time.

Rear Skid Plate, For Slash, Black

This is the optional RPM Back Skid Plate for usage on the
Traxxas 2WD Slash.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Rear Skid Plate
One 3x12mm Button Head Screw

REQUIRES:
Setup on the vehicle

REMARKS:
Need to be utilized with Rear Bumper Mount (RPMC0150) or (RPMC0151)
Likewise readily available in Blue (RPMC1001) and Gray (RPMC1002)

Below is an additional thing that compliments the thing being talked about.

Low Visibility Wheelie Bars, For Traxxas Slash 2Wd & Slash 4X4

These are the optional RPM Low Exposure Wheelie Bars
for the Traxxas Slash 2WD and Slash 4x4.

**Only deals with RPM Back Bumper, does not work with stock Traxxas Bumper.**

FEATURES:
Solidified plastic building and construction
Prevents vehicle from turning over in reverse during hard
    velocity

INCLUDES:
Wheelie Bar Assembly with Mounting Hardware and Recommendations

The below thing additionally sets really well with the thing being talked about.

Mud Flaps, For Slash Bumper

These are the RPM Mud Flaps for usage on the
RPM Bumpers developed for the Traxxas Slash.

FEATURES:
Rubber building and construction
Black in color

INCLUDES:
Two Mud Flaps
Two Support Arms
Two Screw Supports
Four 3x10mm Buttonhead Screws
Four 3x16mm Buttonhead Screws
Direction Sheet

REQUIRES:
Setup on the vehicle

REMARKS:
Functions just with the following Bumpers:
RPM Back Bumper Black Slash (RPMC0080)
RPM Back Bumper Chrome Slash (RPMC0081)
RPM Back Bumper Blue Slash (RPMC0082)

Want an additional great thing to compliment the above pointed out thing?

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two Front bearing (hub) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

This thing compliments the above talked about thing.

Body Washers (8)

This is the Traxxas replacement Body Washers.

FEATURES:
Nylon building and construction
Assists avoid the body mount hole from cracking prematurely
White in color

SPECS:
Outer Size: 0.87" (22mm)
Inner Size: 0.26" (6.7mm)

INCLUDES:
8 large body mount washers