RPM Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Black

This is the optional Back Bumper Mount from RPM for usage on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
3 3x25mm Screws
One 3mm Locknut
2 RPM Decals

NEEDS:
Installation on the automobile
2mm Allen Motorist for Installation

The listed below thing also pairs actually well with the thing being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Below is an additional thing that compliments the thing being reviewed.

Rear Bumper, For Traxxas Slash 2Wd, Black

This is the optional RPM Back Bumper for usage on the Traxxas Slash.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Left Side Bumper Support
One Right Side Bumper Support
One Rear Bumper
8 3x16mm Buttonhead Screws

NEEDS:
Installation on the automobile

REMARKS:
Likewise readily available in:
Blue (RPMC0082)
Chrome (RPMC0081)

Below is a great thing that many others have actually purchased the exact same time.

Rear Skid Plate, For Slash, Black

This is the optional RPM Back Skid Plate for usage on the
Traxxas 2WD Slash.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Rear Skid Plate
One 3x12mm Button Head Screw

NEEDS:
Installation on the automobile

REMARKS:
Must be utilized with Rear Bumper Mount (RPMC0150) or (RPMC0151)
Likewise readily available in Blue (RPMC1001) and Gray (RPMC1002)

Below is an additional thing that compliments the thing being reviewed.

Low Visibility Wheelie Bars, For Traxxas Slash 2Wd & Slash 4X4

These are the optional RPM Low Presence Wheelie Bars
for the Traxxas Slash 2WD and Slash 4x4.

**Just deals with RPM Back Bumper, does not work with stock Traxxas Bumper.**

FEATURES:
Hardened plastic building
Avoids automobile from turning over in reverse throughout hard
    acceleration

INCLUDES:
Wheelie Bar Assembly with Mounting Hardware and Instructions

The listed below thing also pairs actually well with the thing being reviewed.

Mud Flaps, For Slash Bumper

These are the RPM Mud Flaps for usage on the
RPM Bumpers developed for the Traxxas Slash.

FEATURES:
Rubber building
Black in color

INCLUDES:
2 Mud Flaps
2 Support Arms
2 Screw Supports
Four 3x10mm Buttonhead Screws
Four 3x16mm Buttonhead Screws
Guideline Sheet

NEEDS:
Installation on the automobile

REMARKS:
Functions just with the following Bumpers:
RPM Back Bumper Black Slash (RPMC0080)
RPM Back Bumper Chrome Slash (RPMC0081)
RPM Back Bumper Blue Slash (RPMC0082)

Want an additional great thing to match the above discussed thing?

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 Front bearing (center) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

This thing compliments the above reviewed thing.

Body Washers (8)

This is the Traxxas replacement Body Washers.

FEATURES:
Nylon building
Assists prevent the body install hole from splitting prematurely
White in color

SPECS:
Outer Diameter: 0.87" (22mm)
Inner Diameter: 0.26" (6.7mm)

INCLUDES:
8 large body install washers