RPM Rear Bumper, For Traxxas Slash 2Wd, Blue

This is the RPM Back Bumper for usage on the Traxxas Slash.

FEATURES:
Nylon building and construction
Blue in color

CONSISTS OF:
One Left Side Bumper Assistance
One Right Side Bumper Assistance
One Rear Bumper
8 3x16mm Buttonhead Screws

REQUIRES:
Installation on the vehicle

COMMENTS:
Also readily available in:
Black (RPMC0080)
Chrome (RPMC0081)

Right here is a wonderful item that lots of others have bought at the very same time.

Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Back Bumper Mount from RPM for usage on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building and construction
Blue in color

CONSISTS OF:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
3 3x25mm Screws
One 3mm Locknut
2|2} RPM Decals

REQUIRES:
Installation on the vehicle
2mm Allen Motorist for Installation

This item is often purchased with the above mentioned item.

Fr Bumper/Skid Blue Nitro Slash

    This is the optional RPM Front Bumper and Skid Plate
for usage on the Traxxas Slash 2WD Short Course Racing Truck.

FEATURES:
Plastic building and construction
Blue in color

CONSISTS OF:
One Front Bumper and Skid Plate

REQUIRES:
Installation on the vehicle

COMMENTS:
Also readily available in Black (RPMC0952)
Chrome (RPMC0954)

This item compliments the above talked about item.



This is the ST Racing Solidified Refined Steel Lock-nut Style Hinge-pin Package
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Fed up with the stock hinge-pins backing out of the A-arms? If you have actually
been running your Traxxas vehicle long enough, you most likely have
already experienced this problem. ST Racing Principles Heat Treated
Refined Steel Lock-Nut Style Hinge-Pin Package will resolve this problem
at last. CNC Machined from premium 12.9 grade carbon
steel, that is then heat dealt with for increase in durability, then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

You will certainly enjoy this product if you have the product just above stated.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on vehicle

This item is often purchased with the above mentioned item.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, blue in color
Direct fit hop-up requires no model modification for setup

CONSISTS OF:
Two Front A-Arms

REQUIRES:
Installation following the model manual

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowest 1.52" (38.5mm) at widest

COMMENTS:
For the black version of this part order RPMC8245