RPM Rear Bumper, For Traxxas Slash 2Wd, Black

This is the optional RPM Back Bumper for usage on the Traxxas Slash.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Left Side Bumper Support
One Right Side Bumper Support
One Rear Bumper
Eight 3x16mm Buttonhead Screws

REQUIRES:
Installation on the car

REMARKS:
Likewise readily available in:
Blue (RPMC0082)
Chrome (RPMC0081)

Right here is a wonderful item that numerous others have actually purchased the very same time.

Low Visibility Wheelie Bars, For Traxxas Slash 2Wd & Slash 4X4

These are the optional RPM Low Exposure Wheelie Bars
for the Traxxas Slash 2WD and Slash 4x4.

**Only deals with RPM Back Bumper, does not work with stock Traxxas Bumper.**

FEATURES:
Hardened plastic building
Avoids car from turning over backwards throughout hard
    acceleration

CONSISTS OF:
Wheelie Bar Assembly with Mounting Hardware and Instructions

The listed below item additionally sets really well with the item being reviewed.

Mud Flaps, For Slash Bumper

These are the RPM Mud Flaps for usage on the
RPM Bumpers created for the Traxxas Slash.

FEATURES:
Rubber building
Black in color

CONSISTS OF:
Two Mud Flaps
Two Support Arms
Two Screw Supports
Four 3x10mm Buttonhead Screws
Four 3x16mm Buttonhead Screws
Guideline Sheet

REQUIRES:
Installation on the car

REMARKS:
Works only with the following Bumpers:
RPM Back Bumper Black Slash (RPMC0080)
RPM Back Bumper Chrome Slash (RPMC0081)
RPM Back Bumper Blue Slash (RPMC0082)

This item is frequently acquired with the above mentioned item.

Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Black

This is the optional Back Bumper Mount from RPM for usage on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
3 3x25mm Screws
One 3mm Locknut
Two RPM Decals

REQUIRES:
Installation on the car
2mm Allen Driver for Installation

Frequently acquired with the item that you are currently reading about.

Fr Bumper/Skid Blk Nitro Slash

    This is the optional RPM Front Bumper and Skid Plate
for usage on the Traxxas Slash 2WD Short Course Racing Truck.

FEATURES:
Plastic building
Black in color

CONSISTS OF:
One Front Bumper and Skid Plate

REQUIRES:
Installation on the car

REMARKS:
Likewise readily available in Blue (RPMC0953)
Chrome (RPMC0954)

Right here is a wonderful item that numerous others have actually purchased the very same time.

Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, coated
Anodized black with white springs
Totally assembled

CONSISTS OF:
Four fully assembled shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and putting together onto the model

This item is frequently acquired with the above mentioned item.

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Heavy Duty Back A-Arms for the
2WD Traxxas Slash Brief Course Racing Truck.

FEATURES:
Nylon building
Black in color
Extremely resilient

CONSISTS OF:
Two Heavy Duty Back A-Arms

REQUIRES:
Installation on the car

SPECS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

REMARKS:
Likewise readily available in Blue RPMC8472