RPM Rear Bearing Carrier For Traxxas Slash 4X4 Or Rustler 4X4, Black

These are optional Rear Bearing Carriers for the Traxxas Slash 4x4, Nitro
Rustler, Nitro Stampede, Nitro Sport, Rad2, Hawk 2 and Eagle/Eagle LSII.

FEATURES:
Nylon building and construction
Black in color

SUCHES AS:
2 Rear Bearing Carriers
Decal

REQUIRES:
2 5x11x4mm ball bearings, DTXC1547

Below is another product that compliments the product being talked about.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

SUCHES AS:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Density: 0.31" (8mm)

COMMENTS:
Also available in Blue (RPMC0705)

Below is a terrific product that many others have purchased the exact same time.

Caster Blocks & Spindle Blocks For The Slash 4X4, Stampede 4X4,

These are the optional RPM Caster and Steering Blocks for all versions of the
Traxxas Slash 4x4, Stampede 4x4 and the 1/10 scale Rally 4WD.

FUNCTIONS:
Plastic building and construction

SUCHES AS:
2 Caster Blocks and 2 Steering Blocks

You will certainly like this item if you have the item earlier discussed.

Led Lightbar Chrome (4) Clear Lights

This is the Clear LED Lightbar in Chrome
for the Traxxas Stampede 4x4 VXL, TRAD29**.

FUNCTIONS:
4 clear LED lights in chrome surface plastic housings

SUCHES AS:
4 Lights with Real estates, Wiring, Installing Hardware and Directions

SPECS:
Real estate Size: 0.68" (17.3mm)

This product compliments the above talked about product.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building and construction

SUCHES AS:
Front driveshaft assembly
Screw pin

REQUIRES:
Setup on car

Below is a terrific product that many others have purchased the exact same time.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building and construction

SUCHES AS:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on car

Several others have purchased this product along with the product that you are currently reviewing.

Shock Rebuild Big Bore/Ultra

This is a shock reconstruct kit for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

This is a great addition to the product currently being talked about.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set consists of the spring retainers that hold the springs in
location over the shock body and the piston heads that control the amount
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on the majority of Traxxas nitro and electrical powered vehicles.
Two hole piston head for higher dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and 2 lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to set up parts.

The below product also pairs actually well with the product being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)