RPM Rear Bearing Carrier For Traxxas Slash 4X4 Or Rustler 4X4, Black

These are optional Back Bearing Carriers for the Traxxas Slash 4x4, Nitro
Rustler, Nitro Stampede, Nitro Sport, Rad2, Hawk 2 and Eagle/Eagle LSII.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
Two Back Bearing Carriers
Decal

NEEDS:
Two 5x11x4mm ball bearings, DTXC1547

Right here is one more item that praises the item being talked about.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Thickness: 0.31" (8mm)

REMARKS:
Also offered in Blue (RPMC0705)

Right here is a excellent item that numerous others have actually purchased the very same time.

Caster Blocks & Spindle Blocks For The Slash 4X4, Stampede 4X4,

These are the optional RPM Caster and Steering Blocks for all versions of the
Traxxas Slash 4x4, Stampede 4x4 and the 1/10 scale Rally 4WD.

FUNCTIONS:
Plastic building

CONSISTS OF:
Two Caster Blocks and 2 Steering Blocks

You will certainly enjoy this thing if you have the thing earlier pointed out.

Led Lightbar Chrome (4) Clear Lights

This is the Clear LED Lightbar in Chrome
for the Traxxas Stampede 4x4 VXL, TRAD29**.

FUNCTIONS:
4 clear LED lights in chrome surface plastic real estates

CONSISTS OF:
4 Lights with Housings, Wiring, Mounting Hardware and Guidelines

SPECIFICATIONS:
Real estate Size: 0.68" (17.3mm)

This item praises the above talked about item.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

CONSISTS OF:
Front driveshaft assembly
Screw pin

NEEDS:
Setup on car

Right here is a excellent item that numerous others have actually purchased the very same time.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

Numerous others have actually bought this item along with the item that you are presently checking out.

Shock Rebuild Big Bore/Ultra

This is a shock rebuild set for 2 Traxxas black plastic shocks. Suches as:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

This is a great enhancement to the item presently being talked about.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
location over the shock body and the piston heads that control the quantity
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on most Traxxas nitro and electrical powered vehicles.
Two hole piston head for higher dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and 2 lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

NEEDS:
Disassembly of shock to install parts.

The below item likewise sets really well with the item being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)