RPM Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Red

These are the optional RPM Strong Rear A-Arms in Red
for the Electric Powered Traxxas 2WD Rustler and Stampede.

FEATURES:
Each A-arm is 0.25oz (7g) lighter than stock A-arm
Removes over 0.03" (0.8mm) of slop from the inner arm mount
Nylon mix building, red in color

CONSISTS OF:
Left and Right Rear A-Arms

This thing compliments the main item below.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of Strong Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Outlaw, Slash and Nitro Slash.

FEATURES:
Composite nylon building, red in color
Nearly 25% lighter than stock versions
Increased clearance areas in the outer part allows increased
    droop travel when utilized with RPM #80372 and #80382 extra-large
    bearing carriers

CONSISTS OF:
2 Strong Front-A Arms in Red

Right here is a great thing that numerous others have actually purchased the same time.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the optional RPM Wide Front Bumper
for the Traxxas Rustler, Stampede, Nitro Sport and Bandit.

FEATURES:
Adds additional 1/2" (13mm) defense to front end
Nylon mix building, red in color

CONSISTS OF:
Wide Front Bumper

SPECS:
Width: 6.2" (157mm)
Length: 2.7" (70mm) from rear of installing location to outside edge

Right here is an additional thing that compliments the thing being discussed.

3X8mm Screws Flat-Head (Hex Drive) (6)

These are the Traxxas Flathead 3 x 8mm Screws.

FEATURES:
Metal building
Black in color

CONSISTS OF:
6 3 x 8mm Flathead Hex Screws

NEEDS:
Installation on the car

You will certainly enjoy this thing if you have the thing above stated.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is exactly what the
steering knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and left to guarantee proper setup

CONSISTS OF:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and steering knuckles