RPM Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Red

These are the optional RPM Heavy Duty Back A-Arms in Red
for the Electric Powered Traxxas 2WD Rustler and Stampede.

FEATURES:
Each A-arm is 0.25oz (7g) lighter than stock A-arm
Removes over 0.03" (0.8mm) of slop from the inner arm mount
Nylon mix building and construction, red in color

INCLUDES:
Left and Right Rear A-Arms

This thing compliments the main item here.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of Heavy Duty Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Outlaw, Slash and Nitro Slash.

FEATURES:
Composite nylon building and construction, red in color
Nearly 25% lighter than stock versions
Increased clearance areas in the external portion allows increased
    droop travel when used with RPM #80372 and #80382 extra-large
    bearing providers

INCLUDES:
Two Heavy Duty Front-A Arms in Red

Here is a terrific thing that lots of others have bought at the exact same time.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the optional RPM Wide Front Bumper
for the Traxxas Rustler, Stampede, Nitro Sport and Bandit.

FEATURES:
Adds additional 1/2" (13mm) defense to front end
Nylon mix building and construction, red in color

INCLUDES:
Wide Front Bumper

SPECIFICATIONS:
Width: 6.2" (157mm)
Length: 2.7" (70mm) from back of installing location to outdoors edge

Here is another thing that compliments the thing being gone over.

3X8mm Screws Flat-Head (Hex Drive) (6)

These are the Traxxas Flathead 3 x 8mm Screws.

FEATURES:
Metal building and construction
Black in color

INCLUDES:
Six 3 x 8mm Flathead Hex Screws

REQUIRES:
Installation on the car

You will certainly love this thing if you have the thing just above discussed.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is what the
guiding knuckles attach to.

FEATURES:
Nylon building and construction, black in color
Stamped right and left to guarantee right setup

INCLUDES:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and guiding knuckles