RPM Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Red

These are the optional RPM Strong Back A-Arms in Red
for the Electric Powered Traxxas 2WD Rustler and Stampede.

FEATURES:
Each A-arm is 0.25oz (7g) lighter than stock A-arm
Removes over 0.03" (0.8mm) of slop from the inner arm mount
Nylon mix construction, red in color

INCLUDES:
Left and Right Rear A-Arms

This product praises the main item below.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of Strong Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Bandit, Slash and Nitro Slash.

FEATURES:
Composite nylon construction, red in color
Nearly 25% lighter than stock variations
Increased clearance areas in the outer part allows increased
    droop travel when utilized with RPM #80372 and #80382 extra-large
    bearing providers

INCLUDES:
Two Strong Front-A Arms in Red

Here is a terrific product that several others have bought at the very same time.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the optional RPM Wide Front Bumper
for the Traxxas Rustler, Stampede, Nitro Sport and Bandit.

FEATURES:
Adds additional 1/2" (13mm) security to front end
Nylon mix construction, red in color

INCLUDES:
Wide Front Bumper

SPECIFICATIONS:
Width: 6.2" (157mm)
Length: 2.7" (70mm) from back of installing area to outside edge

Here is an additional product that praises the product being gone over.

3X8mm Screws Flat-Head (Hex Drive) (6)

These are the Traxxas Flathead 3 x 8mm Screws.

FEATURES:
Metal construction
Black in color

INCLUDES:
Six 3 x 8mm Flathead Hex Screws

NEEDS:
Setup on the vehicle

You will like this item if you have the item earlier stated.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks mount to the front A-arms and is exactly what the
guiding knuckles attach to.

FEATURES:
Nylon construction, black in color
Stamped right and left to guarantee correct installation

INCLUDES:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and guiding knuckles